Corby · Northamptonshire
Secondary Glazing in Corby
Period homes in Corby can keep their character and gain comfort with discreet secondary glazing fitted inside the existing window reveals.
- NN17
- NN18
- Guide from £465
Acoustic secondary glazing for homes and businesses in Corby
Owners of listed buildings should seek listed building consent before installing secondary glazing, as the requirements depend on the building and the council. Secondary glazing is often seen as a minimal, reversible change, but carrying out works that need consent without it is a criminal offence.
Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.
Low-level secondary glazing is still glazing, so the safety glazing rules for critical locations apply. In England, Approved Document K treats glass within 800mm of the floor as a critical location, so low-level secondary panes should be toughened or laminated safety glass.
If an existing window is relied on for escape in a fire, the secondary glazing in front of it must open easily and give enough clear opening. The surveyor checks which windows are escape windows, so the opening style and catches do not block a way out.
What a typical job includes
- Removal of packaging and cleaning of new glass
- Made-to-measure slim aluminium frames and glass
- Advice on opening style, glass and fire escape
- Written quote fixing the price for the specification
Working in Corby
- Postcodes covered
- NN17, NN18 and the surrounding area, including Uppingham, Kettering and Market Harborough
- Coast
- Corby is well inland, around 66 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Corby the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- In city centres and busy streets, acoustic secondary glazing is a common response to traffic, rail and nightlife noise. Flats, listed buildings and conservation areas often limit external changes, which makes internal secondary glazing a practical option.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Corby
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.
Specification choices
Lift-out panel
A lightweight panel that lifts out of its frame, for windows rarely opened, giving a slim and economical secondary unit.
Fixed panel
A non-opening unit for windows never opened, giving the most airtight seal for noise and draught reduction.
Acoustic laminated glass
Laminated glass with a sound-dampening interlayer, combined with a generous cavity, for properties affected by traffic, rail or aircraft noise.
Secondary Glazing in Corby: questions
Is secondary glazing as good as double glazing?
It depends on the goal. For noise, secondary glazing is often more effective, because the wider gap between the two windows reduces sound better than the narrow cavity of a sealed unit. For heat, a well-sealed secondary unit with low-E glass significantly improves a single-glazed window. It also keeps original windows, which matters in listed buildings.
Do I need permission for secondary glazing on a listed building?
You should seek listed building consent from the council's planning department before installing secondary glazing on a listed building. Secondary glazing is often seen as a reversible, low-impact change, but consent requirements depend on the building. Carrying out works that need consent without it is a criminal offence. If your home is not listed but is in a conservation area, check with the council if you are unsure.
Which opening style should I choose?
Choose based on how you use the window. Vertical sliders suit sash windows and keep meeting rails aligned. Horizontal sliders suit wide windows. Hinged panels give full access for cleaning and escape. Lift-out and fixed panels suit windows that are rarely or never opened, and give the tightest seal for noise.
How much noise does secondary glazing block?
Results depend on the size of the gap between the windows, the glass type and thickness, the seals and the original window. A larger cavity and acoustic laminated glass give the strongest improvement. The survey checks reveal depth and noise sources, so the specification can be tailored to the noise you are dealing with.
Do you cover Corby for secondary glazing?
Yes. We can quote for secondary glazing across Corby and the surrounding Northamptonshire area, including postcode districts NN17 and NN18, and nearby Uppingham, Kettering and Market Harborough. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Corby
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.