Redditch · Worcestershire
Secondary Glazing in Redditch
We cover Redditch and Worcestershire for secondary glazing in period homes, flats and listed buildings, with sightlines matched to the original windows.
- B96
- B97
- B98
- Guide from £465
Secondary glazing listed buildings in Redditch: what to know
The price of secondary glazing depends on the size and number of windows, the opening style, the glass specification, any shaped or arched heads, reveal depth and condition, and access. Acoustic laminated glass and shaped frames cost more than standard clear glass in rectangular frames.
For noise reduction, the size of the air gap between the original window and the secondary unit matters a great deal, and a wider cavity generally performs better. Acoustic laminated glass and well-sealed frames improve results further, especially against traffic, rail and aircraft noise.
Condensation in the gap between the two windows is reduced by making the secondary unit the more airtight of the two. The original window should not be fully sealed, so any moisture that gets into the cavity can escape outside rather than being trapped against the glass.
Glass for secondary glazing is heavy, so the frames need firm fixings into the reveal or a supporting sub-frame. The surveyor checks that plaster, timber linings and window boards are sound enough to carry the weight, and allows for any packing needed in uneven reveals.
What's included
- Survey of each window, reveal depth and sightlines
- Advice on opening style, glass and fire escape
- Fitting, sealing and checking every opening panel
- Written quote fixing the price for the specification
Local details for Redditch
- Postcodes covered
- B96, B97, B98 and the surrounding area, including Bromsgrove, Shirley and Droitwich
- Coast
- Redditch is well inland, around 66 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Redditch the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- In city centres and busy streets, acoustic secondary glazing is a common response to traffic, rail and nightlife noise. Flats, listed buildings and conservation areas often limit external changes, which makes internal secondary glazing a practical option.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Redditch
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.
Specification choices
Fixed panel
A non-opening unit for windows never opened, giving the most airtight seal for noise and draught reduction.
Acoustic laminated glass
Laminated glass with a sound-dampening interlayer, combined with a generous cavity, for properties affected by traffic, rail or aircraft noise.
Low-E glass
Coated glass that reflects heat back into the room, improving insulation when the original window is single glazed.
Secondary Glazing in Redditch: questions
Does secondary glazing need safety glass?
It does in critical locations. In England, glass within 800mm of the floor, glass in doors and glass near doors are critical locations under Approved Document K, and these apply to secondary glazing too. Low-level secondary panes should be toughened or laminated safety glass. The surveyor checks each window during the survey.
How much noise does secondary glazing block?
Results depend on the size of the gap between the windows, the glass type and thickness, the seals and the original window. A larger cavity and acoustic laminated glass give the strongest improvement. The survey checks reveal depth and noise sources, so the specification can be tailored to the noise you are dealing with.
How do I clean and look after secondary glazing?
Open or remove the panels as designed, then clean the glass with mild soapy water and a soft cloth. Wipe the aluminium frames and runners, and keep tracks free of dust so panels slide smoothly. Check seals and catches occasionally. Avoid abrasive cleaners, which can scratch coated glass.
Is secondary glazing as good as double glazing?
It depends on the goal. For noise, secondary glazing is often more effective, because the wider gap between the two windows reduces sound better than the narrow cavity of a sealed unit. For heat, a well-sealed secondary unit with low-E glass significantly improves a single-glazed window. It also keeps original windows, which matters in listed buildings.
Do you cover Redditch for secondary glazing?
Yes. We can quote for secondary glazing across Redditch and the surrounding Worcestershire area, including postcode districts B96, B97 and B98, and nearby Bromsgrove, Shirley and Droitwich. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Redditch
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.