Catford · Greater London
Shopfront Glazing in Catford
After a break-in attempt in Catford, laminated security glass can keep a broken pane in its frame, and our glaziers can advise on the right class for your premises.
- SE6
- SE13
- SE4
- Guide from £375
Commercial shop front doors for homes and businesses in Catford
In England, works that materially affect the external appearance of a shopfront, such as a new frontage, new entrance doors or a changed layout, usually need planning permission. Reglazing a broken pane to match the existing does not change the appearance, but check with the local planning authority if unsure.
Security glazing is classified under BS EN 356 by its resistance to manual attack. Classes P1A to P5A are tested by dropping a steel ball on the glass from set heights, and the higher classes P6B to P8B are tested with repeated axe and hammer blows.
The price depends on the size and number of panes, the glass specification, the frame material, door type and ironmongery, access equipment for large panes and any out-of-hours working. Automatic doors, security glass classes and curved or bespoke framing add cost. See the guide prices for typical ranges.
If the building is listed, alterations to the shopfront need listed building consent as well as any planning permission. Many councils also publish shopfront design guides for conservation areas and high streets, which can set expectations on materials, proportions and the treatment of signs.
What you get
- Survey of the frontage, structure above and entrance layout
- Removal of old glazing and temporary boarding where needed
- Aluminium or timber framing, doors and ironmongery as quoted
- Installation, sealing and adjustment of entrance doors
Local details for Catford
- Postcodes covered
- SE6, SE13, SE4 and the surrounding area, including Lewisham, Blackheath and Greenwich
- Coast
- Catford is well inland, around 27 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Catford the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- Market-town and village shops are often in older or listed buildings where timber shopfronts and traditional proportions are expected. Council design guidance and longer travel for large glass deliveries can both affect the timescale.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Catford
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
Specification choices
Timber shopfront
Painted timber frames, stallrisers and doors in traditional proportions, often expected for listed buildings and conservation areas.
Insulated glass units
Sealed double-glazed units in the shopfront frames, reducing heat loss and condensation compared with single sheets of display glass.
Frameless glass entrance
Toughened glass doors on patch fittings and floor springs, giving an open, clear entrance between framed or frameless display screens.
Shopfront Glazing in Catford: questions
How wide should a shop entrance door be?
For new buildings in England, access guidance gives a minimum effective clear width of 1000mm for external doors used by the general public, and 775mm where an existing building is altered. The clear width is the usable opening with the door open, not the door size. Other UK nations publish their own guidance, so we confirm the applicable figure.
Does shop glass need markings on it?
Large areas of clear glass that people could walk into need markings. In England, the guidance for buildings other than dwellings puts manifestation at 850–1000mm and 1400–1600mm above the floor, and workplace rules across Great Britain require glass to be made apparent where needed for safety. Logos or frosted bands can meet this if they contrast clearly.
Can my shop stay open while the shopfront is replaced?
Often, yes, at least in part. Work can be phased so one section is replaced while the entrance stays usable, or carried out early, late or on closing days where access and noise rules allow. Temporary boarding keeps the premises secure between stages. We agree the programme with you before work starts so trading disruption is planned.
Do I have to remove the step at my shop entrance?
Not automatically, but in England, Wales and Scotland the Equality Act 2010 requires service providers to make reasonable adjustments, which can include physical changes like a ramp or a level threshold. What is reasonable depends on the business and the building. When an entrance is replaced, building regulations on access also apply to the new work.
Do you cover Catford for shopfront glazing?
Yes. We can quote for shopfront glazing across Catford and the surrounding Greater London area, including postcode districts SE6, SE13 and SE4, and nearby Lewisham, Blackheath and Greenwich. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Catford
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.