Orpington · Greater London
Shopfront Glazing in Orpington
We cover Orpington and Greater London for shopfront glazing, from single display panes to complete aluminium or timber shopfronts with accessible entrance doors.
- BR6
- BR5
- BR7
- Guide from £375
About shop front glass replacement in Orpington
The price depends on the size and number of panes, the glass specification, the frame material, door type and ironmongery, access equipment for large panes and any out-of-hours working. Automatic doors, security glass classes and curved or bespoke framing add cost. See the guide prices for typical ranges.
Manual entrance doors in buildings other than dwellings in England should open with no more than 30N of force at the door edge from closed to 30 degrees, then 22.5N from 30 to 60 degrees. Heavy doors and strong closers often fail this, so closers are chosen and adjusted to suit.
For new buildings in England, access guidance gives a minimum effective clear width of 1000mm for external doors used by the general public, and 775mm where an existing building is being altered. Measuring the clear opening, not the door leaf, shows whether an entrance meets that figure.
In England, large areas of clear glass in shopfronts and entrance screens that people could walk into need manifestation at two levels, 850–1000mm and 1400–1600mm above the floor. Logos, frosted bands or patterns can do the job if they contrast clearly with what is seen through the glass.
Included as standard
- Survey of the frontage, structure above and entrance layout
- Safety or security glass specified to suit the position
- Manifestation where required, final clean and handover
- Removal of old glazing and temporary boarding where needed
Working in Orpington
- Postcodes covered
- BR6, BR5, BR7 and the surrounding area, including Swanley, Bromley and Bexleyheath
- Coast
- Orpington is well inland, around 20 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Orpington the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- Market-town and village shops are often in older or listed buildings where timber shopfronts and traditional proportions are expected. Council design guidance and longer travel for large glass deliveries can both affect the timescale.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Orpington
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
What you can choose
Frameless glass entrance
Toughened glass doors on patch fittings and floor springs, giving an open, clear entrance between framed or frameless display screens.
Aluminium shopfront framing
Slim, powder-coated or anodised aluminium frames for display glass and doors, available in many colours and suited to most modern frontages.
Toughened display glass
Toughened safety glass that breaks into small, blunt pieces, used for doors and low-level panes where impact safety is the main need.
Shopfront Glazing in Orpington: questions
What do security glass ratings such as P2A or P4A mean?
These are classes from BS EN 356, the standard for resistance of security glazing to manual attack. Classes P1A to P5A are tested by dropping a steel ball onto the glass from set heights, with higher numbers resisting more. Classes P6B to P8B are tested with repeated axe and hammer blows and suit higher-risk premises. We advise on a class at survey.
How wide should a shop entrance door be?
For new buildings in England, access guidance gives a minimum effective clear width of 1000mm for external doors used by the general public, and 775mm where an existing building is altered. The clear width is the usable opening with the door open, not the door size. Other UK nations publish their own guidance, so we confirm the applicable figure.
How long does a new shopfront take?
Replacing a single display pane can often be done in one visit once the glass is made. A complete new shopfront involves survey, any consents, manufacture of frames and glass, then installation, so allow several weeks or more overall. The fitting itself is usually short, and we board up where needed to keep the shop secure throughout.
Do I need planning permission for a new shopfront?
In England, a new shopfront or alterations that materially change its appearance, such as new doors, a different layout or external shutters, usually need planning permission. Listed buildings also need listed building consent. Wales, Scotland and Northern Ireland have their own planning systems. We can provide drawings and specifications to support your application to the planning authority.
Do you cover Orpington for shopfront glazing?
Yes. We can quote for shopfront glazing across Orpington and the surrounding Greater London area, including postcode districts BR6, BR5 and BR7, and nearby Swanley, Bromley and Bexleyheath. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Orpington
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.