Market Harborough · Northamptonshire
Shopfront Glazing in Market Harborough
Shopfront work in Market Harborough starts with a survey of the glass, framing and entrance, followed by a written quote that fixes the price for the specification shown.
- LE16
- Guide from £375
Shopfront glazing in Market Harborough: what to know
Manual entrance doors in buildings other than dwellings in England should open with no more than 30N of force at the door edge from closed to 30 degrees, then 22.5N from 30 to 60 degrees. Heavy doors and strong closers often fail this, so closers are chosen and adjusted to suit.
Security glazing is classified under BS EN 356 by its resistance to manual attack. Classes P1A to P5A are tested by dropping a steel ball on the glass from set heights, and the higher classes P6B to P8B are tested with repeated axe and hammer blows.
Laminated glass holds together when broken because the layers are bonded to a plastic interlayer, so a smashed display pane usually stays in its frame until it is replaced. Toughened glass breaks into small pieces and leaves an open hole, which is why laminated glass is often chosen for street-level shop windows.
In England, large areas of clear glass in shopfronts and entrance screens that people could walk into need manifestation at two levels, 850–1000mm and 1400–1600mm above the floor. Logos, frosted bands or patterns can do the job if they contrast clearly with what is seen through the glass.
What's included
- Safety or security glass specified to suit the position
- Manifestation where required, final clean and handover
- Removal of old glazing and temporary boarding where needed
- Installation, sealing and adjustment of entrance doors
Local details for Market Harborough
- Postcodes covered
- LE16 and the surrounding area, including Corby, Kettering and Wigston Magna
- Coast
- Market Harborough is well inland, around 80 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Market Harborough the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- Market-town and village shops are often in older or listed buildings where timber shopfronts and traditional proportions are expected. Council design guidance and longer travel for large glass deliveries can both affect the timescale.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Market Harborough
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
What you can choose
Aluminium shopfront framing
Slim, powder-coated or anodised aluminium frames for display glass and doors, available in many colours and suited to most modern frontages.
Laminated security glass
Laminated glass classified under BS EN 356 that resists manual attack and stays in the frame when broken, keeping the shop secure.
Timber shopfront
Painted timber frames, stallrisers and doors in traditional proportions, often expected for listed buildings and conservation areas.
Shopfront Glazing in Market Harborough: questions
How wide should a shop entrance door be?
For new buildings in England, access guidance gives a minimum effective clear width of 1000mm for external doors used by the general public, and 775mm where an existing building is altered. The clear width is the usable opening with the door open, not the door size. Other UK nations publish their own guidance, so we confirm the applicable figure.
Do I have to remove the step at my shop entrance?
Not automatically, but in England, Wales and Scotland the Equality Act 2010 requires service providers to make reasonable adjustments, which can include physical changes like a ramp or a level threshold. What is reasonable depends on the business and the building. When an entrance is replaced, building regulations on access also apply to the new work.
What do security glass ratings such as P2A or P4A mean?
These are classes from BS EN 356, the standard for resistance of security glazing to manual attack. Classes P1A to P5A are tested by dropping a steel ball onto the glass from set heights, with higher numbers resisting more. Classes P6B to P8B are tested with repeated axe and hammer blows and suit higher-risk premises. We advise on a class at survey.
Do I need planning permission for a new shopfront?
In England, a new shopfront or alterations that materially change its appearance, such as new doors, a different layout or external shutters, usually need planning permission. Listed buildings also need listed building consent. Wales, Scotland and Northern Ireland have their own planning systems. We can provide drawings and specifications to support your application to the planning authority.
Do you cover Market Harborough for shopfront glazing?
Yes. We can quote for shopfront glazing across Market Harborough and the surrounding Northamptonshire area, including postcode districts LE16, and nearby Corby, Kettering and Wigston Magna. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
More glazing in Market Harborough
Get a written quote in Market Harborough
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.