Mansfield · Nottinghamshire
Shopfront Glazing in Mansfield
Is a cracked display window holding back your shop in Mansfield? Our glaziers can survey the frontage and quote for safety or laminated security glass made to fit.
- NG18
- NG19
- Guide from £375
Commercial shop front doors in Mansfield
The price depends on the size and number of panes, the glass specification, the frame material, door type and ironmongery, access equipment for large panes and any out-of-hours working. Automatic doors, security glass classes and curved or bespoke framing add cost. See the guide prices for typical ranges.
New or changed signs may need advertisement consent from the local planning authority. Many plain, non-illuminated fascia signs have deemed consent subject to conditions, while illuminated signs more often need express consent. Displaying an advert without the consent it needs is a criminal offence in England.
Some councils' shopfront guidance discourages solid external roller shutters and grilles, and in England external security measures that change the frontage's appearance usually need planning permission. Laminated security glass or internal open-mesh grilles are often considered as alternatives that keep the window display visible.
In England, works that materially affect the external appearance of a shopfront, such as a new frontage, new entrance doors or a changed layout, usually need planning permission. Reglazing a broken pane to match the existing does not change the appearance, but check with the local planning authority if unsure.
What's included
- Safety or security glass specified to suit the position
- Removal of old glazing and temporary boarding where needed
- Manifestation where required, final clean and handover
- Installation, sealing and adjustment of entrance doors
Working in Mansfield
- Postcodes covered
- NG18, NG19 and the surrounding area, including Sutton-in-Ashfield, Kirkby-in-Ashfield and Hucknall
- Coast
- Mansfield is well inland, around 72 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Mansfield the midwinter sun reaches about 13° above the horizon at noon, with roughly 7.3 hours of daylight, rising to about 60° and 16.7 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- High-street shopfronts may need a council licence for scaffolding or hoarding on the pavement, lifting at restricted times and overnight boarding. Conservation area rules, neighbouring businesses and shared freeholds can all shape the design and programme.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Mansfield
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
Options to choose between
Timber shopfront
Painted timber frames, stallrisers and doors in traditional proportions, often expected for listed buildings and conservation areas.
Frameless glass entrance
Toughened glass doors on patch fittings and floor springs, giving an open, clear entrance between framed or frameless display screens.
Insulated glass units
Sealed double-glazed units in the shopfront frames, reducing heat loss and condensation compared with single sheets of display glass.
Shopfront Glazing in Mansfield: questions
How long does a new shopfront take?
Replacing a single display pane can often be done in one visit once the glass is made. A complete new shopfront involves survey, any consents, manufacture of frames and glass, then installation, so allow several weeks or more overall. The fitting itself is usually short, and we board up where needed to keep the shop secure throughout.
What type of glass should a shopfront have?
Shopfront glass must be safety glass wherever it sits in a critical location, such as doors, panels beside doors and low-level panes. Beyond that, laminated glass is often chosen for display windows because it stays in the frame when broken, keeping the premises secure. Higher-security laminated glass classified under BS EN 356 can be specified where risk is greater.
Do I need planning permission for a new shopfront?
In England, a new shopfront or alterations that materially change its appearance, such as new doors, a different layout or external shutters, usually need planning permission. Listed buildings also need listed building consent. Wales, Scotland and Northern Ireland have their own planning systems. We can provide drawings and specifications to support your application to the planning authority.
Do I have to remove the step at my shop entrance?
Not automatically, but in England, Wales and Scotland the Equality Act 2010 requires service providers to make reasonable adjustments, which can include physical changes like a ramp or a level threshold. What is reasonable depends on the business and the building. When an entrance is replaced, building regulations on access also apply to the new work.
Do you cover Mansfield for shopfront glazing?
Yes. We can quote for shopfront glazing across Mansfield and the surrounding Nottinghamshire area, including postcode districts NG18 and NG19, and nearby Sutton-in-Ashfield, Kirkby-in-Ashfield and Hucknall. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Mansfield
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.