Bath · Somerset
Shopfront Glazing in Bath
From frameless glass entrances to traditional timber frontages, we can quote for shopfront glazing in Bath that suits the building and the street.
- BA1
- BA2
- Guide from £375
About shopfront glazing in Bath
Some councils' shopfront guidance discourages solid external roller shutters and grilles, and in England external security measures that change the frontage's appearance usually need planning permission. Laminated security glass or internal open-mesh grilles are often considered as alternatives that keep the window display visible.
In England, works that materially affect the external appearance of a shopfront, such as a new frontage, new entrance doors or a changed layout, usually need planning permission. Reglazing a broken pane to match the existing does not change the appearance, but check with the local planning authority if unsure.
Laminated glass holds together when broken because the layers are bonded to a plastic interlayer, so a smashed display pane usually stays in its frame until it is replaced. Toughened glass breaks into small pieces and leaves an open hole, which is why laminated glass is often chosen for street-level shop windows.
Manual entrance doors in buildings other than dwellings in England should open with no more than 30N of force at the door edge from closed to 30 degrees, then 22.5N from 30 to 60 degrees. Heavy doors and strong closers often fail this, so closers are chosen and adjusted to suit.
Included as standard
- Safety or security glass specified to suit the position
- Installation, sealing and adjustment of entrance doors
- Aluminium or timber framing, doors and ironmongery as quoted
- Removal of old glazing and temporary boarding where needed
Working in Bath
- Postcodes covered
- BA1, BA2 and the surrounding area, including Keynsham, Trowbridge and Kingswood
- Coast
- Bath is well inland, around 29 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Bath the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- High-street shopfronts may need a council licence for scaffolding or hoarding on the pavement, lifting at restricted times and overnight boarding. Conservation area rules, neighbouring businesses and shared freeholds can all shape the design and programme.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Bath
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
What you can choose
Automatic entrance doors
Powered sliding or swing doors opened by sensor or push pad, making entry easier for wheelchair users, buggies and deliveries.
Timber shopfront
Painted timber frames, stallrisers and doors in traditional proportions, often expected for listed buildings and conservation areas.
Insulated glass units
Sealed double-glazed units in the shopfront frames, reducing heat loss and condensation compared with single sheets of display glass.
Shopfront Glazing in Bath: questions
What type of glass should a shopfront have?
Shopfront glass must be safety glass wherever it sits in a critical location, such as doors, panels beside doors and low-level panes. Beyond that, laminated glass is often chosen for display windows because it stays in the frame when broken, keeping the premises secure. Higher-security laminated glass classified under BS EN 356 can be specified where risk is greater.
What affects the cost of shopfront glazing?
The main cost drivers are the size and number of panes, the glass type and any security class, the frame material, the door type and ironmongery, and the access equipment needed to lift large panes. Automatic doors, bespoke shapes and out-of-hours working also add cost. See the guide prices, and your written quote fixes the price.
What do security glass ratings such as P2A or P4A mean?
These are classes from BS EN 356, the standard for resistance of security glazing to manual attack. Classes P1A to P5A are tested by dropping a steel ball onto the glass from set heights, with higher numbers resisting more. Classes P6B to P8B are tested with repeated axe and hammer blows and suit higher-risk premises. We advise on a class at survey.
Do I need planning permission for a new shopfront?
In England, a new shopfront or alterations that materially change its appearance, such as new doors, a different layout or external shutters, usually need planning permission. Listed buildings also need listed building consent. Wales, Scotland and Northern Ireland have their own planning systems. We can provide drawings and specifications to support your application to the planning authority.
Do you cover Bath for shopfront glazing?
Yes. We can quote for shopfront glazing across Bath and the surrounding Somerset area, including postcode districts BA1 and BA2, and nearby Keynsham, Trowbridge and Kingswood. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Bath
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.