Burntwood · Staffordshire
Shopfront Glazing in Burntwood
We cover Burntwood and Staffordshire for shopfront glazing, from single display panes to complete aluminium or timber shopfronts with accessible entrance doors.
- WS7
- Guide from £375
Shop window glass for homes and businesses in Burntwood
The same guidance in England asks for an accessible entrance to have a level threshold or, where a raised threshold cannot be avoided, one no more than 15mm high in total, with a level landing in front of the door at least 1500mm by 1500mm clear of the door swing.
Manual entrance doors in buildings other than dwellings in England should open with no more than 30N of force at the door edge from closed to 30 degrees, then 22.5N from 30 to 60 degrees. Heavy doors and strong closers often fail this, so closers are chosen and adjusted to suit.
If the building is listed, alterations to the shopfront need listed building consent as well as any planning permission. Many councils also publish shopfront design guides for conservation areas and high streets, which can set expectations on materials, proportions and the treatment of signs.
In England, large areas of clear glass in shopfronts and entrance screens that people could walk into need manifestation at two levels, 850–1000mm and 1400–1600mm above the floor. Logos, frosted bands or patterns can do the job if they contrast clearly with what is seen through the glass.
What a typical job includes
- Removal of old glazing and temporary boarding where needed
- Manifestation where required, final clean and handover
- Installation, sealing and adjustment of entrance doors
- Aluminium or timber framing, doors and ironmongery as quoted
Working in Burntwood
- Postcodes covered
- WS7 and the surrounding area, including Lichfield, Cannock and Aldridge
- Coast
- Burntwood is well inland, around 91 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Burntwood the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- Market-town and village shops are often in older or listed buildings where timber shopfronts and traditional proportions are expected. Council design guidance and longer travel for large glass deliveries can both affect the timescale.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Burntwood
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
Specification choices
Aluminium shopfront framing
Slim, powder-coated or anodised aluminium frames for display glass and doors, available in many colours and suited to most modern frontages.
Timber shopfront
Painted timber frames, stallrisers and doors in traditional proportions, often expected for listed buildings and conservation areas.
Insulated glass units
Sealed double-glazed units in the shopfront frames, reducing heat loss and condensation compared with single sheets of display glass.
Shopfront Glazing in Burntwood: questions
What do security glass ratings such as P2A or P4A mean?
These are classes from BS EN 356, the standard for resistance of security glazing to manual attack. Classes P1A to P5A are tested by dropping a steel ball onto the glass from set heights, with higher numbers resisting more. Classes P6B to P8B are tested with repeated axe and hammer blows and suit higher-risk premises. We advise on a class at survey.
Do I have to remove the step at my shop entrance?
Not automatically, but in England, Wales and Scotland the Equality Act 2010 requires service providers to make reasonable adjustments, which can include physical changes like a ramp or a level threshold. What is reasonable depends on the business and the building. When an entrance is replaced, building regulations on access also apply to the new work.
Does shop glass need markings on it?
Large areas of clear glass that people could walk into need markings. In England, the guidance for buildings other than dwellings puts manifestation at 850–1000mm and 1400–1600mm above the floor, and workplace rules across Great Britain require glass to be made apparent where needed for safety. Logos or frosted bands can meet this if they contrast clearly.
What affects the cost of shopfront glazing?
The main cost drivers are the size and number of panes, the glass type and any security class, the frame material, the door type and ironmongery, and the access equipment needed to lift large panes. Automatic doors, bespoke shapes and out-of-hours working also add cost. See the guide prices, and your written quote fixes the price.
Do you cover Burntwood for shopfront glazing?
Yes. We can quote for shopfront glazing across Burntwood and the surrounding Staffordshire area, including postcode districts WS7, and nearby Lichfield, Cannock and Aldridge. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Burntwood
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.