Banstead · Surrey
Shopfront Glazing in Banstead
Our glaziers fit shop windows and entrance doors in Banstead for retailers, cafés, salons and offices, planning the work to limit disruption to trading.
- SM7
- SM2
- KT17
- Guide from £375
Aluminium shopfronts in Banstead: what to know
Some councils' shopfront guidance discourages solid external roller shutters and grilles, and in England external security measures that change the frontage's appearance usually need planning permission. Laminated security glass or internal open-mesh grilles are often considered as alternatives that keep the window display visible.
The same guidance in England asks for an accessible entrance to have a level threshold or, where a raised threshold cannot be avoided, one no more than 15mm high in total, with a level landing in front of the door at least 1500mm by 1500mm clear of the door swing.
Security glazing is classified under BS EN 356 by its resistance to manual attack. Classes P1A to P5A are tested by dropping a steel ball on the glass from set heights, and the higher classes P6B to P8B are tested with repeated axe and hammer blows.
The price depends on the size and number of panes, the glass specification, the frame material, door type and ironmongery, access equipment for large panes and any out-of-hours working. Automatic doors, security glass classes and curved or bespoke framing add cost. See the guide prices for typical ranges.
What you get
- Survey of the frontage, structure above and entrance layout
- Manifestation where required, final clean and handover
- Removal of old glazing and temporary boarding where needed
- Aluminium or timber framing, doors and ironmongery as quoted
Local details for Banstead
- Postcodes covered
- SM7, SM2, KT17 and the surrounding area, including Sutton, Ewell and Epsom
- Coast
- Banstead is well inland, around 42 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Banstead the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- Market-town and village shops are often in older or listed buildings where timber shopfronts and traditional proportions are expected. Council design guidance and longer travel for large glass deliveries can both affect the timescale.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Banstead
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
Choosing your shopfront glazing
Insulated glass units
Sealed double-glazed units in the shopfront frames, reducing heat loss and condensation compared with single sheets of display glass.
Aluminium shopfront framing
Slim, powder-coated or anodised aluminium frames for display glass and doors, available in many colours and suited to most modern frontages.
Timber shopfront
Painted timber frames, stallrisers and doors in traditional proportions, often expected for listed buildings and conservation areas.
Shopfront Glazing in Banstead: questions
How long does a new shopfront take?
Replacing a single display pane can often be done in one visit once the glass is made. A complete new shopfront involves survey, any consents, manufacture of frames and glass, then installation, so allow several weeks or more overall. The fitting itself is usually short, and we board up where needed to keep the shop secure throughout.
What type of glass should a shopfront have?
Shopfront glass must be safety glass wherever it sits in a critical location, such as doors, panels beside doors and low-level panes. Beyond that, laminated glass is often chosen for display windows because it stays in the frame when broken, keeping the premises secure. Higher-security laminated glass classified under BS EN 356 can be specified where risk is greater.
What affects the cost of shopfront glazing?
The main cost drivers are the size and number of panes, the glass type and any security class, the frame material, the door type and ironmongery, and the access equipment needed to lift large panes. Automatic doors, bespoke shapes and out-of-hours working also add cost. See the guide prices, and your written quote fixes the price.
Do I have to remove the step at my shop entrance?
Not automatically, but in England, Wales and Scotland the Equality Act 2010 requires service providers to make reasonable adjustments, which can include physical changes like a ramp or a level threshold. What is reasonable depends on the business and the building. When an entrance is replaced, building regulations on access also apply to the new work.
Do you cover Banstead for shopfront glazing?
Yes. We can quote for shopfront glazing across Banstead and the surrounding Surrey area, including postcode districts SM7, SM2 and KT17, and nearby Sutton, Ewell and Epsom. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Banstead
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.