Call 0800 088 6248

Walton-on-Thames · Surrey

Shopfront Glazing in Walton-on-Thames

Taking on a new lease in Walton-on-Thames? We can quote for a new shopfront and supply the drawings and specifications you may need for planning or advertisement consent.

  • KT12
  • TW17
  • TW16
  • Guide from £375

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Walton-on-Thames: commercial shop front doors

For new buildings in England, access guidance gives a minimum effective clear width of 1000mm for external doors used by the general public, and 775mm where an existing building is being altered. Measuring the clear opening, not the door leaf, shows whether an entrance meets that figure.

Manual entrance doors in buildings other than dwellings in England should open with no more than 30N of force at the door edge from closed to 30 degrees, then 22.5N from 30 to 60 degrees. Heavy doors and strong closers often fail this, so closers are chosen and adjusted to suit.

Security glazing is classified under BS EN 356 by its resistance to manual attack. Classes P1A to P5A are tested by dropping a steel ball on the glass from set heights, and the higher classes P6B to P8B are tested with repeated axe and hammer blows.

New or changed signs may need advertisement consent from the local planning authority. Many plain, non-illuminated fascia signs have deemed consent subject to conditions, while illuminated signs more often need express consent. Displaying an advert without the consent it needs is a criminal offence in England.

What a typical job includes

  • Aluminium or timber framing, doors and ironmongery as quoted
  • Survey of the frontage, structure above and entrance layout
  • Removal of old glazing and temporary boarding where needed
  • Safety or security glass specified to suit the position
Glazed shopfront with a central glass door on a high street

About Walton-on-Thames for this job

Postcodes covered
KT12, TW17, TW16 and the surrounding area, including Sunbury-on-Thames, Esher and Hampton
Coast
Walton-on-Thames is well inland, around 55 km from the nearest coast, so salt exposure is not usually a factor.
Daylight and sun
In Walton-on-Thames the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
Access and setting
Market-town and village shops are often in older or listed buildings where timber shopfronts and traditional proportions are expected. Council design guidance and longer travel for large glass deliveries can both affect the timescale.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Walton-on-Thames

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Replace a laminated pane, 2000 × 2200 mm£855 – £1,095
Security laminated pane, 2000 × 2200 mm£1,195 – £1,495
Toughened door pane, 900 × 2000 mm£375 – £485

Get a guide price for your size

For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).

What you can choose

Aluminium shopfront framing

Slim, powder-coated or anodised aluminium frames for display glass and doors, available in many colours and suited to most modern frontages.

Toughened display glass

Toughened safety glass that breaks into small, blunt pieces, used for doors and low-level panes where impact safety is the main need.

Timber shopfront

Painted timber frames, stallrisers and doors in traditional proportions, often expected for listed buildings and conservation areas.

Shopfront Glazing in Walton-on-Thames: questions

Do I need planning permission for a new shopfront?

In England, a new shopfront or alterations that materially change its appearance, such as new doors, a different layout or external shutters, usually need planning permission. Listed buildings also need listed building consent. Wales, Scotland and Northern Ireland have their own planning systems. We can provide drawings and specifications to support your application to the planning authority.

Does shop glass need markings on it?

Large areas of clear glass that people could walk into need markings. In England, the guidance for buildings other than dwellings puts manifestation at 850–1000mm and 1400–1600mm above the floor, and workplace rules across Great Britain require glass to be made apparent where needed for safety. Logos or frosted bands can meet this if they contrast clearly.

What type of glass should a shopfront have?

Shopfront glass must be safety glass wherever it sits in a critical location, such as doors, panels beside doors and low-level panes. Beyond that, laminated glass is often chosen for display windows because it stays in the frame when broken, keeping the premises secure. Higher-security laminated glass classified under BS EN 356 can be specified where risk is greater.

Can my shop stay open while the shopfront is replaced?

Often, yes, at least in part. Work can be phased so one section is replaced while the entrance stays usable, or carried out early, late or on closing days where access and noise rules allow. Temporary boarding keeps the premises secure between stages. We agree the programme with you before work starts so trading disruption is planned.

Do you cover Walton-on-Thames for shopfront glazing?

Yes. We can quote for shopfront glazing across Walton-on-Thames and the surrounding Surrey area, including postcode districts KT12, TW17 and TW16, and nearby Sunbury-on-Thames, Esher and Hampton. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Walton-on-Thames

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote