Call 0800 088 6248

Rothesay · Argyll & Bute

Shower Screens in Rothesay

Is a chipped or sagging shower door bothering you in Rothesay? We can measure, remake and refit the glass, and check the hinges and wall fixings at the same time.

  • PA20
  • Guide from £395

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

About made to measure shower screen in Rothesay

Screens should be measured after tiling is finished, not from plans. Walls are often out of plumb and floors fall towards the drain, and the glass is made to follow those real angles. Measuring early is a common cause of uneven gaps and leaks.

An easy-clean coating is a water-repellent layer bonded to the glass that helps water run off and reduces limescale and soap marks. It does not stop cleaning altogether, and how long it lasts depends on following the care instructions and avoiding abrasive products.

A walk-in panel fixed only at the wall and floor needs a bracing bar running to the wall or ceiling to stop it flexing. The bar's position is planned around tiles, windows and shower valves, and a floor channel can reduce or remove the need for a brace.

The glass screen stops spray, but it is not the waterproofing. The tanking behind the tiles, the tray or floor fall and the drain do that job. Clear silicone along the glass edges then seals the joints, and it needs time to cure before the shower is used.

What you get

  • Fixing into solid backing, levelled and aligned
  • Clear silicone sealing to tray, floor and walls
  • Made-to-measure toughened safety glass with factory-made holes
  • Survey and measurement once tiling is complete
Frameless walk-in shower screen with black fittings in a tiled bathroom

Rothesay at a glance

Postcodes covered
PA20 and the surrounding area, including Largs, Dunoon and Gourock
Coast
Rothesay is about 2 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Shower glass sits indoors, so salt air has little effect on it, but coastal homes can have damp, humid air that slows drying. Good bathroom ventilation and a quick squeegee after use help prevent mould on the silicone and marks on the hardware.
Daylight and sun
In Rothesay the midwinter sun reaches about 11° above the horizon at noon, with roughly 6.7 hours of daylight, rising to about 58° and 17.3 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
Access and setting
Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
Rules in Scotland
Section 4 (Safety) of the Scottish Technical Handbooks covers glazing that people could collide with, such as glass in and beside doors and low-level glazing, where safety glass is needed.

Guide prices in Rothesay

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Walk-in shower panel£395 – £695
Hinged door with in-line panel£795 – £1,295
Corner or full enclosure£995 – £1,595

Get a guide price for your size

Specification choices

Walk-in wet room panel

A single fixed glass panel with a bracing bar or floor channel, leaving an open entry and no door to clean or adjust.

Over-bath screen

A fixed or hinged toughened glass panel on the bath edge, made to measure for baths that sit against sloping ceilings or uneven walls.

Easy-clean coating

A water-repellent coating bonded to the glass that helps water bead and run off, reducing limescale and the time spent cleaning.

Shower Screens in Rothesay: questions

What thickness of glass should a shower screen be?

For frameless screens, 8mm toughened glass suits most doors and enclosures, and 10mm is commonly used for walk-in and wet room panels that stand with little support. Thinner glass is used in framed enclosures where the frame does some of the work. We recommend a thickness at survey based on the panel size and how it is fixed.

Is a chipped shower screen safe to keep using?

A chip on the edge of toughened glass can weaken the whole panel, because the surface is under stress and damage at the edge can lead to sudden breakage. It is safer to stop using that door or panel and have it replaced. We can remake it from the original measurements or a fresh template.

How do I stop limescale building up on shower glass?

The simplest habit is to squeegee the glass after every shower so water does not dry on it. Clean weekly with a mild, non-abrasive bathroom cleaner and a soft cloth, and rinse well. Avoid scouring pads, powders and strong descalers, which can scratch coatings, dull hinge finishes and break down silicone seals.

When should my shower screen be measured?

Your screen should be measured once the walls are tiled and the tray or wet room floor is finished. The glass is made to follow the exact angles of the finished surfaces, and tiles, adhesive and trims all change the dimensions. If you are mid-renovation, we can advise on fixing positions and backing before tiling starts.

Do you cover Rothesay for shower screens?

Yes. We can quote for shower screens across Rothesay and the surrounding Argyll & Bute area, including postcode districts PA20, and nearby Largs, Dunoon and Gourock. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Rothesay

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote