Call 0800 088 6248

Consett · County Durham

Shower Screens in Consett

Is a chipped or sagging shower door bothering you in Consett? We can measure, remake and refit the glass, and check the hinges and wall fixings at the same time.

  • DH8
  • Guide from £395

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Frameless shower screens in Consett: what to know

Glass-to-wall and glass-to-glass hinges suit most doors, and pivot hinges let a door swing from a point set in from the edge. Doors normally open outwards, so check the swing clears the toilet, basin and bathroom door before choosing a layout.

A walk-in panel fixed only at the wall and floor needs a bracing bar running to the wall or ceiling to stop it flexing. The bar's position is planned around tiles, windows and shower valves, and a floor channel can reduce or remove the need for a brace.

The price depends mainly on panel sizes, the number of panels, glass thickness, the hinge and bracing hardware, and any cut-outs for sloping ceilings, trays or skirting. Low-iron or satin glass, an easy-clean coating and special finishes add cost. See the guide prices for typical ranges.

Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory, though it cannot remove it completely, and it can be specified for any screen.

What a typical job includes

  • Made-to-measure toughened safety glass with factory-made holes
  • Easy-clean coating where specified, plus care advice
  • Survey and measurement once tiling is complete
  • Fixing into solid backing, levelled and aligned
Frameless walk-in shower screen with black fittings in a tiled bathroom

Local details for Consett

Postcodes covered
DH8 and the surrounding area, including Stanley, Newburn and Chester-le-Street
Coast
Consett is well inland, around 30 km from the nearest coast, so salt exposure is not usually a factor.
Daylight and sun
In Consett the midwinter sun reaches about 12° above the horizon at noon, with roughly 6.9 hours of daylight, rising to about 59° and 17.1 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
Access and setting
Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Consett

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Walk-in shower panel£395 – £695
Hinged door with in-line panel£795 – £1,295
Corner or full enclosure£995 – £1,595

Get a guide price for your size

What you can choose

Walk-in wet room panel

A single fixed glass panel with a bracing bar or floor channel, leaving an open entry and no door to clean or adjust.

Easy-clean coating

A water-repellent coating bonded to the glass that helps water bead and run off, reducing limescale and the time spent cleaning.

Over-bath screen

A fixed or hinged toughened glass panel on the bath edge, made to measure for baths that sit against sloping ceilings or uneven walls.

Shower Screens in Consett: questions

What thickness of glass should a shower screen be?

For frameless screens, 8mm toughened glass suits most doors and enclosures, and 10mm is commonly used for walk-in and wet room panels that stand with little support. Thinner glass is used in framed enclosures where the frame does some of the work. We recommend a thickness at survey based on the panel size and how it is fixed.

When should my shower screen be measured?

Your screen should be measured once the walls are tiled and the tray or wet room floor is finished. The glass is made to follow the exact angles of the finished surfaces, and tiles, adhesive and trims all change the dimensions. If you are mid-renovation, we can advise on fixing positions and backing before tiling starts.

Is an easy-clean coating on shower glass worth having?

An easy-clean coating makes water bead and run off, so limescale and soap marks build up more slowly and wiping takes less effort. It is most useful in hard-water areas. It does not replace cleaning, and its life depends on using non-abrasive products, so we give you the care instructions with the screen.

Is a chipped shower screen safe to keep using?

A chip on the edge of toughened glass can weaken the whole panel, because the surface is under stress and damage at the edge can lead to sudden breakage. It is safer to stop using that door or panel and have it replaced. We can remake it from the original measurements or a fresh template.

Do you cover Consett for shower screens?

Yes. We can quote for shower screens across Consett and the surrounding County Durham area, including postcode districts DH8, and nearby Stanley, Newburn and Chester-le-Street. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Consett

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote