Call 0800 088 6248

Long Eaton · Derbyshire

Shower Screens in Long Eaton

Building a wet room in Long Eaton? We can quote for a walk-in glass panel with a bracing bar or floor channel, planned around your tiles, valve and drain position.

  • NG10
  • NG9
  • DE72
  • Guide from £395

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

About walk in shower screen in Long Eaton

Limescale builds up more quickly in hard-water areas. Wiping the glass with a squeegee after each shower, cleaning weekly with a mild non-abrasive cleaner and avoiding scouring pads keeps it clear. Harsh descalers can also dull metal hinges and attack silicone seals.

Because toughened glass cannot be cut or drilled after toughening, hinge holes, clamp positions and notches around trays or skirting are formed before the glass goes into the furnace. A panel that does not fit has to be remade, so accurate templating matters.

Shower screen glass is toughened safety glass made to BS EN 12150. It is heated and then quickly cooled during manufacture, which makes it much stronger than ordinary glass and means that if it does break, it breaks into small, blunt pieces rather than sharp shards.

An easy-clean coating is a water-repellent layer bonded to the glass that helps water run off and reduces limescale and soap marks. It does not stop cleaning altogether, and how long it lasts depends on following the care instructions and avoiding abrasive products.

What a typical job includes

  • Fixing into solid backing, levelled and aligned
  • Made-to-measure toughened safety glass with factory-made holes
  • Easy-clean coating where specified, plus care advice
  • Clear silicone sealing to tray, floor and walls
Frameless walk-in shower screen with black fittings in a tiled bathroom

About Long Eaton for this job

Postcodes covered
NG10, NG9, DE72 and the surrounding area, including Ilkeston, Nottingham and West Bridgford
Coast
Long Eaton is well inland, around 86 km from the nearest coast, so salt exposure is not usually a factor.
Daylight and sun
In Long Eaton the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.3 hours of daylight, rising to about 60° and 16.7 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
Access and setting
Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Long Eaton

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Walk-in shower panel£395 – £695
Hinged door with in-line panel£795 – £1,295
Corner or full enclosure£995 – £1,595

Get a guide price for your size

What you can choose

Pivot door

A door that swings on pivots set in from its edge, useful where the swing space in front of the shower is limited.

Easy-clean coating

A water-repellent coating bonded to the glass that helps water bead and run off, reducing limescale and the time spent cleaning.

Low-iron glass

Glass with less iron, which removes the green edge tint of standard glass and keeps tiles and stone looking their true colour.

Shower Screens in Long Eaton: questions

Will a frameless shower screen leak?

A well-designed frameless screen contains spray effectively, but it is not completely watertight like a sealed enclosure. Leaks are prevented by the right panel length, a properly falling floor or level tray, drip and sweep seals on doors, and neat silicone on fixed edges. Shower head position matters too, so we look at it during the survey.

When should my shower screen be measured?

Your screen should be measured once the walls are tiled and the tray or wet room floor is finished. The glass is made to follow the exact angles of the finished surfaces, and tiles, adhesive and trims all change the dimensions. If you are mid-renovation, we can advise on fixing positions and backing before tiling starts.

Why have a shower screen made to measure instead of buying one?

A made-to-measure screen fits the space exactly, which matters where walls are out of plumb, ceilings slope, trays are non-standard or the opening is an unusual width. Off-the-shelf enclosures rely on adjustment profiles that can leave wide gaps or visible frames. Bespoke glass follows the real shape of the room and keeps sealant lines neat.

Is an easy-clean coating on shower glass worth having?

An easy-clean coating makes water bead and run off, so limescale and soap marks build up more slowly and wiping takes less effort. It is most useful in hard-water areas. It does not replace cleaning, and its life depends on using non-abrasive products, so we give you the care instructions with the screen.

Do you cover Long Eaton for shower screens?

Yes. We can quote for shower screens across Long Eaton and the surrounding Derbyshire area, including postcode districts NG10, NG9 and DE72, and nearby Ilkeston, Nottingham and West Bridgford. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Long Eaton

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote