Brentwood · Essex
Shower Screens in Brentwood
Our glaziers fit frameless shower screens in Brentwood using 8mm or 10mm toughened safety glass, with hinge and bracing finishes chosen to match your taps and fittings.
- CM13
- CM14
- CM15
- Guide from £395
Wet room glass panel in Brentwood
Because toughened glass cannot be cut or drilled after toughening, hinge holes, clamp positions and notches around trays or skirting are formed before the glass goes into the furnace. A panel that does not fit has to be remade, so accurate templating matters.
Glass-to-wall and glass-to-glass hinges suit most doors, and pivot hinges let a door swing from a point set in from the edge. Doors normally open outwards, so check the swing clears the toilet, basin and bathroom door before choosing a layout.
Shower screen glass is toughened safety glass made to BS EN 12150. It is heated and then quickly cooled during manufacture, which makes it much stronger than ordinary glass and means that if it does break, it breaks into small, blunt pieces rather than sharp shards.
Hinges carry the full weight of a glass door, so they must fix into solid backing. Tiled plasterboard or stud walls usually need timber noggins or suitable heavy-duty fixings behind the hinge positions, which is easier to arrange before tiling than afterwards.
What you get
- Hinges, clamps, channels or bracing bars in your finish
- Fixing into solid backing, levelled and aligned
- Survey and measurement once tiling is complete
- Clear silicone sealing to tray, floor and walls
Working in Brentwood
- Postcodes covered
- CM13, CM14, CM15 and the surrounding area, including Billericay, Hornchurch and Romford
- Coast
- Brentwood sits roughly 16 km from the nearest coastline, close enough that exposure on open or high ground is worth considering. Shower glass sits indoors, so salt air has little effect on it, but coastal homes can have damp, humid air that slows drying. Good bathroom ventilation and a quick squeegee after use help prevent mould on the silicone and marks on the hardware.
- Daylight and sun
- In Brentwood the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
- Access and setting
- Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Brentwood
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
What you can choose
Easy-clean coating
A water-repellent coating bonded to the glass that helps water bead and run off, reducing limescale and the time spent cleaning.
Satin or tinted glass
Satin bands, full satin panels or grey and bronze tints that add privacy or style while still letting light into the shower.
Over-bath screen
A fixed or hinged toughened glass panel on the bath edge, made to measure for baths that sit against sloping ceilings or uneven walls.
Shower Screens in Brentwood: questions
Will a frameless shower screen leak?
A well-designed frameless screen contains spray effectively, but it is not completely watertight like a sealed enclosure. Leaks are prevented by the right panel length, a properly falling floor or level tray, drip and sweep seals on doors, and neat silicone on fixed edges. Shower head position matters too, so we look at it during the survey.
When should my shower screen be measured?
Your screen should be measured once the walls are tiled and the tray or wet room floor is finished. The glass is made to follow the exact angles of the finished surfaces, and tiles, adhesive and trims all change the dimensions. If you are mid-renovation, we can advise on fixing positions and backing before tiling starts.
How do I stop limescale building up on shower glass?
The simplest habit is to squeegee the glass after every shower so water does not dry on it. Clean weekly with a mild, non-abrasive bathroom cleaner and a soft cloth, and rinse well. Avoid scouring pads, powders and strong descalers, which can scratch coatings, dull hinge finishes and break down silicone seals.
Can a shower screen be fitted to a stud or plasterboard wall?
Yes, provided the hinges and brackets fix into solid backing. On stud or plasterboard walls that usually means timber noggins behind the fixing points, or suitable heavy-duty fixings where noggins were not fitted. A heavy glass door on weak fixings can drop or pull away, so we check the wall during the survey.
Do you cover Brentwood for shower screens?
Yes. We can quote for shower screens across Brentwood and the surrounding Essex area, including postcode districts CM13, CM14 and CM15, and nearby Billericay, Hornchurch and Romford. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Brentwood
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.