Inverness · Highlands & Islands
Shower Screens in Inverness
A tired shower curtain or leaking framed enclosure in Inverness can be replaced with clear toughened glass, fixed into solid backing and sealed neatly to the tiles.
- IV1
- IV3
- Guide from £395
Wet room glass panel in Inverness: what to know
Because toughened glass cannot be cut or drilled after toughening, hinge holes, clamp positions and notches around trays or skirting are formed before the glass goes into the furnace. A panel that does not fit has to be remade, so accurate templating matters.
Glass thickness is usually 8mm or 10mm for frameless work. 8mm suits most doors and enclosures, while 10mm is commonly used for walk-in and wet room panels that stand with little support and need to stay rigid when knocked or leaned on.
Limescale builds up more quickly in hard-water areas. Wiping the glass with a squeegee after each shower, cleaning weekly with a mild non-abrasive cleaner and avoiding scouring pads keeps it clear. Harsh descalers can also dull metal hinges and attack silicone seals.
The price depends mainly on panel sizes, the number of panels, glass thickness, the hinge and bracing hardware, and any cut-outs for sloping ceilings, trays or skirting. Low-iron or satin glass, an easy-clean coating and special finishes add cost. See the guide prices for typical ranges.
What's included
- Clear silicone sealing to tray, floor and walls
- Fixing into solid backing, levelled and aligned
- Made-to-measure toughened safety glass with factory-made holes
- Hinges, clamps, channels or bracing bars in your finish
Local details for Inverness
- Postcodes covered
- IV1, IV3 and the surrounding area, including Nairn, Forres and Elgin
- Coast
- Inverness is about 2 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Shower glass sits indoors, so salt air has little effect on it, but coastal homes can have damp, humid air that slows drying. Good bathroom ventilation and a quick squeegee after use help prevent mould on the silicone and marks on the hardware.
- Daylight and sun
- In Inverness the midwinter sun reaches about 9° above the horizon at noon, with roughly 6.3 hours of daylight, rising to about 56° and 17.7 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
- Access and setting
- Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
- Rules in Scotland
- Section 4 (Safety) of the Scottish Technical Handbooks covers glazing that people could collide with, such as glass in and beside doors and low-level glazing, where safety glass is needed.
Guide prices in Inverness
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
Choosing your shower screens
Hinged door enclosure
A glass door on wall or glass hinges with fixed side panels, suiting alcoves, corners and trays where a fully enclosed shower is wanted.
Over-bath screen
A fixed or hinged toughened glass panel on the bath edge, made to measure for baths that sit against sloping ceilings or uneven walls.
Walk-in wet room panel
A single fixed glass panel with a bracing bar or floor channel, leaving an open entry and no door to clean or adjust.
Shower Screens in Inverness: questions
Is a chipped shower screen safe to keep using?
A chip on the edge of toughened glass can weaken the whole panel, because the surface is under stress and damage at the edge can lead to sudden breakage. It is safer to stop using that door or panel and have it replaced. We can remake it from the original measurements or a fresh template.
Why have a shower screen made to measure instead of buying one?
A made-to-measure screen fits the space exactly, which matters where walls are out of plumb, ceilings slope, trays are non-standard or the opening is an unusual width. Off-the-shelf enclosures rely on adjustment profiles that can leave wide gaps or visible frames. Bespoke glass follows the real shape of the room and keeps sealant lines neat.
When should my shower screen be measured?
Your screen should be measured once the walls are tiled and the tray or wet room floor is finished. The glass is made to follow the exact angles of the finished surfaces, and tiles, adhesive and trims all change the dimensions. If you are mid-renovation, we can advise on fixing positions and backing before tiling starts.
What thickness of glass should a shower screen be?
For frameless screens, 8mm toughened glass suits most doors and enclosures, and 10mm is commonly used for walk-in and wet room panels that stand with little support. Thinner glass is used in framed enclosures where the frame does some of the work. We recommend a thickness at survey based on the panel size and how it is fixed.
Do you cover Inverness for shower screens?
Yes. We can quote for shower screens across Inverness and the surrounding Highlands & Islands area, including postcode districts IV1 and IV3, and nearby Nairn, Forres and Elgin. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Inverness
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.