Lancaster · Lancashire
Shower Screens in Lancaster
Looking for a frameless shower screen in Lancaster? Our glaziers can measure your finished bathroom and quote for toughened glass made to fit your walls, tray and ceiling exactly.
- LA1
- LA3
- LA4
- Guide from £395
About bespoke shower enclosure in Lancaster
Screens should be measured after tiling is finished, not from plans. Walls are often out of plumb and floors fall towards the drain, and the glass is made to follow those real angles. Measuring early is a common cause of uneven gaps and leaks.
An easy-clean coating is a water-repellent layer bonded to the glass that helps water run off and reduces limescale and soap marks. It does not stop cleaning altogether, and how long it lasts depends on following the care instructions and avoiding abrasive products.
Glass-to-wall and glass-to-glass hinges suit most doors, and pivot hinges let a door swing from a point set in from the edge. Doors normally open outwards, so check the swing clears the toilet, basin and bathroom door before choosing a layout.
The glass screen stops spray, but it is not the waterproofing. The tanking behind the tiles, the tray or floor fall and the drain do that job. Clear silicone along the glass edges then seals the joints, and it needs time to cure before the shower is used.
What a typical job includes
- Survey and measurement once tiling is complete
- Made-to-measure toughened safety glass with factory-made holes
- Fixing into solid backing, levelled and aligned
- Easy-clean coating where specified, plus care advice

Lancaster at a glance
- Postcodes covered
- LA1, LA3, LA4 and the surrounding area, including Morecambe, Fleetwood and Thornton-Cleveleys
- Coast
- Lancaster is about 5 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Shower glass sits indoors, so salt air has little effect on it, but coastal homes can have damp, humid air that slows drying. Good bathroom ventilation and a quick squeegee after use help prevent mould on the silicone and marks on the hardware.
- Daylight and sun
- In Lancaster the midwinter sun reaches about 12° above the horizon at noon, with roughly 7.1 hours of daylight, rising to about 59° and 16.9 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
- Access and setting
- Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Lancaster
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
Specification choices
Pivot door
A door that swings on pivots set in from its edge, useful where the swing space in front of the shower is limited.
Easy-clean coating
A water-repellent coating bonded to the glass that helps water bead and run off, reducing limescale and the time spent cleaning.
Low-iron glass
Glass with less iron, which removes the green edge tint of standard glass and keeps tiles and stone looking their true colour.
Shower Screens in Lancaster: questions
Why have a shower screen made to measure instead of buying one?
A made-to-measure screen fits the space exactly, which matters where walls are out of plumb, ceilings slope, trays are non-standard or the opening is an unusual width. Off-the-shelf enclosures rely on adjustment profiles that can leave wide gaps or visible frames. Bespoke glass follows the real shape of the room and keeps sealant lines neat.
How do I stop limescale building up on shower glass?
The simplest habit is to squeegee the glass after every shower so water does not dry on it. Clean weekly with a mild, non-abrasive bathroom cleaner and a soft cloth, and rinse well. Avoid scouring pads, powders and strong descalers, which can scratch coatings, dull hinge finishes and break down silicone seals.
What thickness of glass should a shower screen be?
For frameless screens, 8mm toughened glass suits most doors and enclosures, and 10mm is commonly used for walk-in and wet room panels that stand with little support. Thinner glass is used in framed enclosures where the frame does some of the work. We recommend a thickness at survey based on the panel size and how it is fixed.
Will a frameless shower screen leak?
A well-designed frameless screen contains spray effectively, but it is not completely watertight like a sealed enclosure. Leaks are prevented by the right panel length, a properly falling floor or level tray, drip and sweep seals on doors, and neat silicone on fixed edges. Shower head position matters too, so we look at it during the survey.
Do you cover Lancaster for shower screens?
Yes. We can quote for shower screens across Lancaster and the surrounding Lancashire area, including postcode districts LA1, LA3 and LA4, and nearby Morecambe, Fleetwood and Thornton-Cleveleys. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Lancaster
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.