Boston · Lincolnshire
Shower Screens in Boston
Our glaziers fit frameless shower screens in Boston using 8mm or 10mm toughened safety glass, with hinge and bracing finishes chosen to match your taps and fittings.
- PE21
- Guide from £395
Made to measure shower screen in Boston: what to know
The glass screen stops spray, but it is not the waterproofing. The tanking behind the tiles, the tray or floor fall and the drain do that job. Clear silicone along the glass edges then seals the joints, and it needs time to cure before the shower is used.
Shower screen glass is toughened safety glass made to BS EN 12150. It is heated and then quickly cooled during manufacture, which makes it much stronger than ordinary glass and means that if it does break, it breaks into small, blunt pieces rather than sharp shards.
Limescale builds up more quickly in hard-water areas. Wiping the glass with a squeegee after each shower, cleaning weekly with a mild non-abrasive cleaner and avoiding scouring pads keeps it clear. Harsh descalers can also dull metal hinges and attack silicone seals.
A walk-in panel fixed only at the wall and floor needs a bracing bar running to the wall or ceiling to stop it flexing. The bar's position is planned around tiles, windows and shower valves, and a floor channel can reduce or remove the need for a brace.
What you get
- Easy-clean coating where specified, plus care advice
- Survey and measurement once tiling is complete
- Hinges, clamps, channels or bracing bars in your finish
- Clear silicone sealing to tray, floor and walls
Local details for Boston
- Postcodes covered
- PE21 and the surrounding area, including Spalding, Sleaford and Skegness
- Coast
- Boston sits roughly 7 km from the nearest coastline, close enough that exposure on open or high ground is worth considering. Shower glass sits indoors, so salt air has little effect on it, but coastal homes can have damp, humid air that slows drying. Good bathroom ventilation and a quick squeegee after use help prevent mould on the silicone and marks on the hardware.
- Daylight and sun
- In Boston the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.3 hours of daylight, rising to about 60° and 16.7 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
- Access and setting
- Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Boston
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
What you can choose
Over-bath screen
A fixed or hinged toughened glass panel on the bath edge, made to measure for baths that sit against sloping ceilings or uneven walls.
Low-iron glass
Glass with less iron, which removes the green edge tint of standard glass and keeps tiles and stone looking their true colour.
Easy-clean coating
A water-repellent coating bonded to the glass that helps water bead and run off, reducing limescale and the time spent cleaning.
Shower Screens in Boston: questions
How do I stop limescale building up on shower glass?
The simplest habit is to squeegee the glass after every shower so water does not dry on it. Clean weekly with a mild, non-abrasive bathroom cleaner and a soft cloth, and rinse well. Avoid scouring pads, powders and strong descalers, which can scratch coatings, dull hinge finishes and break down silicone seals.
Why have a shower screen made to measure instead of buying one?
A made-to-measure screen fits the space exactly, which matters where walls are out of plumb, ceilings slope, trays are non-standard or the opening is an unusual width. Off-the-shelf enclosures rely on adjustment profiles that can leave wide gaps or visible frames. Bespoke glass follows the real shape of the room and keeps sealant lines neat.
Is a chipped shower screen safe to keep using?
A chip on the edge of toughened glass can weaken the whole panel, because the surface is under stress and damage at the edge can lead to sudden breakage. It is safer to stop using that door or panel and have it replaced. We can remake it from the original measurements or a fresh template.
What thickness of glass should a shower screen be?
For frameless screens, 8mm toughened glass suits most doors and enclosures, and 10mm is commonly used for walk-in and wet room panels that stand with little support. Thinner glass is used in framed enclosures where the frame does some of the work. We recommend a thickness at survey based on the panel size and how it is fixed.
Do you cover Boston for shower screens?
Yes. We can quote for shower screens across Boston and the surrounding Lincolnshire area, including postcode districts PE21, and nearby Spalding, Sleaford and Skegness. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Boston
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.