Shrewsbury · Shropshire
Shower Screens in Shrewsbury
Our glaziers fit frameless shower screens in Shrewsbury using 8mm or 10mm toughened safety glass, with hinge and bracing finishes chosen to match your taps and fittings.
- SY1
- SY2
- SY3
- Guide from £395
Shrewsbury: bespoke shower enclosure
Because toughened glass cannot be cut or drilled after toughening, hinge holes, clamp positions and notches around trays or skirting are formed before the glass goes into the furnace. A panel that does not fit has to be remade, so accurate templating matters.
Glass-to-wall and glass-to-glass hinges suit most doors, and pivot hinges let a door swing from a point set in from the edge. Doors normally open outwards, so check the swing clears the toilet, basin and bathroom door before choosing a layout.
Shower screen glass is toughened safety glass made to BS EN 12150. It is heated and then quickly cooled during manufacture, which makes it much stronger than ordinary glass and means that if it does break, it breaks into small, blunt pieces rather than sharp shards.
Glass thickness is usually 8mm or 10mm for frameless work. 8mm suits most doors and enclosures, while 10mm is commonly used for walk-in and wet room panels that stand with little support and need to stay rigid when knocked or leaned on.
What you get
- Clear silicone sealing to tray, floor and walls
- Fixing into solid backing, levelled and aligned
- Easy-clean coating where specified, plus care advice
- Made-to-measure toughened safety glass with factory-made holes
Working in Shrewsbury
- Postcodes covered
- SY1, SY2, SY3 and the surrounding area, including Wellington, Telford and Oswestry
- Coast
- Shrewsbury is well inland, around 64 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Shrewsbury the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
- Access and setting
- Flats often mean carrying large panels up stairs or in small lifts, so panel sizes may need splitting. Building rules on working hours and noise, and bathrooms above other homes, make careful sealing and protection of finishes especially important.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Shrewsbury
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
What you can choose
Satin or tinted glass
Satin bands, full satin panels or grey and bronze tints that add privacy or style while still letting light into the shower.
Pivot door
A door that swings on pivots set in from its edge, useful where the swing space in front of the shower is limited.
Over-bath screen
A fixed or hinged toughened glass panel on the bath edge, made to measure for baths that sit against sloping ceilings or uneven walls.
Shower Screens in Shrewsbury: questions
Why have a shower screen made to measure instead of buying one?
A made-to-measure screen fits the space exactly, which matters where walls are out of plumb, ceilings slope, trays are non-standard or the opening is an unusual width. Off-the-shelf enclosures rely on adjustment profiles that can leave wide gaps or visible frames. Bespoke glass follows the real shape of the room and keeps sealant lines neat.
What thickness of glass should a shower screen be?
For frameless screens, 8mm toughened glass suits most doors and enclosures, and 10mm is commonly used for walk-in and wet room panels that stand with little support. Thinner glass is used in framed enclosures where the frame does some of the work. We recommend a thickness at survey based on the panel size and how it is fixed.
Is an easy-clean coating on shower glass worth having?
An easy-clean coating makes water bead and run off, so limescale and soap marks build up more slowly and wiping takes less effort. It is most useful in hard-water areas. It does not replace cleaning, and its life depends on using non-abrasive products, so we give you the care instructions with the screen.
Can a shower screen be fitted to a stud or plasterboard wall?
Yes, provided the hinges and brackets fix into solid backing. On stud or plasterboard walls that usually means timber noggins behind the fixing points, or suitable heavy-duty fixings where noggins were not fitted. A heavy glass door on weak fixings can drop or pull away, so we check the wall during the survey.
Do you cover Shrewsbury for shower screens?
Yes. We can quote for shower screens across Shrewsbury and the surrounding Shropshire area, including postcode districts SY1, SY2 and SY3, and nearby Wellington, Telford and Oswestry. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Shrewsbury
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.