Leatherhead · Surrey
Shower Screens in Leatherhead
Looking for a frameless shower screen in Leatherhead? Our glaziers can measure your finished bathroom and quote for toughened glass made to fit your walls, tray and ceiling exactly.
- KT21
- KT22
- Guide from £395
Leatherhead: bespoke shower enclosure
The price depends mainly on panel sizes, the number of panels, glass thickness, the hinge and bracing hardware, and any cut-outs for sloping ceilings, trays or skirting. Low-iron or satin glass, an easy-clean coating and special finishes add cost. See the guide prices for typical ranges.
Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory, though it cannot remove it completely, and it can be specified for any screen.
Shower screen glass is toughened safety glass made to BS EN 12150. It is heated and then quickly cooled during manufacture, which makes it much stronger than ordinary glass and means that if it does break, it breaks into small, blunt pieces rather than sharp shards.
Glass thickness is usually 8mm or 10mm for frameless work. 8mm suits most doors and enclosures, while 10mm is commonly used for walk-in and wet room panels that stand with little support and need to stay rigid when knocked or leaned on.
What a typical job includes
- Made-to-measure toughened safety glass with factory-made holes
- Fixing into solid backing, levelled and aligned
- Easy-clean coating where specified, plus care advice
- Hinges, clamps, channels or bracing bars in your finish
Local details for Leatherhead
- Postcodes covered
- KT21, KT22 and the surrounding area, including Epsom, Ewell and Esher
- Coast
- Leatherhead is well inland, around 52 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Leatherhead the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
- Access and setting
- Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Leatherhead
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
Specification choices
Easy-clean coating
A water-repellent coating bonded to the glass that helps water bead and run off, reducing limescale and the time spent cleaning.
Walk-in wet room panel
A single fixed glass panel with a bracing bar or floor channel, leaving an open entry and no door to clean or adjust.
Hinged door enclosure
A glass door on wall or glass hinges with fixed side panels, suiting alcoves, corners and trays where a fully enclosed shower is wanted.
Shower Screens in Leatherhead: questions
How long does it take to fit a shower screen?
Most shower screens are fitted in a single visit once the glass has been made, which usually takes a couple of weeks after measuring. The silicone then needs time to cure, so you should wait before using the shower, and we tell you how long on the day. Your quote confirms the expected timescale.
Can a shower screen be fitted to a stud or plasterboard wall?
Yes, provided the hinges and brackets fix into solid backing. On stud or plasterboard walls that usually means timber noggins behind the fixing points, or suitable heavy-duty fixings where noggins were not fitted. A heavy glass door on weak fixings can drop or pull away, so we check the wall during the survey.
When should my shower screen be measured?
Your screen should be measured once the walls are tiled and the tray or wet room floor is finished. The glass is made to follow the exact angles of the finished surfaces, and tiles, adhesive and trims all change the dimensions. If you are mid-renovation, we can advise on fixing positions and backing before tiling starts.
Is an easy-clean coating on shower glass worth having?
An easy-clean coating makes water bead and run off, so limescale and soap marks build up more slowly and wiping takes less effort. It is most useful in hard-water areas. It does not replace cleaning, and its life depends on using non-abrasive products, so we give you the care instructions with the screen.
Do you cover Leatherhead for shower screens?
Yes. We can quote for shower screens across Leatherhead and the surrounding Surrey area, including postcode districts KT21 and KT22, and nearby Epsom, Ewell and Esher. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Leatherhead
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.