Derby · Derbyshire
Sliding Doors in Derby
If your patio doors in Derby could be lifted off their track or no longer lock properly, we can survey them and quote for secure replacements.
- DE1
- DE22
- DE23
- Guide from £1,795
uPVC patio doors for homes and businesses in Derby
In England, a replacement door with more than 60% of its internal face glazed should achieve a U-value of 1.4 W/m²K or a Doorset Energy Rating of band C under Approved Document L. Large sliding doors in new extensions are assessed within the extension's energy calculations.
The cost of sliding patio doors depends on the opening size, the number of panels and tracks, aluminium or uPVC, standard or lift-and-slide hardware, colour, glass and threshold. Very large panels may need lifting equipment. See the guide prices for typical ranges; the written quote fixes your figure.
Security on sliding doors depends on multi-point hook locks that grip the frame, anti-lift blocks that stop panels being lifted off the track, internally glazed beads and an anti-snap cylinder. Older patio doors without anti-lift protection can sometimes be lifted out, so ask whether the system is tested to PAS 24.
Sliding door panes reach near the floor, so they need safety glass. In England, Approved Document K treats glass in doors, and in side panels within 300mm of a door's edge, up to 1500mm from the floor as critical. Toughened glass is standard; laminated adds security and holds together if broken.
What a typical job includes
- Removal and disposal of the existing doors
- Written guarantee terms and advice on building regulations sign-off
- Made-to-measure sliding doorset in your chosen colour
- Survey of the opening, levels and support above

Local details for Derby
- Postcodes covered
- DE1, DE22, DE23 and the surrounding area, including Belper, Ilkeston and Heanor
- Coast
- Derby is well inland, around 97 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Derby the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.3 hours of daylight, rising to about 60° and 16.7 hours in midsummer. Large sliding panes on south or west elevations can bring strong solar gain and glare, so solar-control or neutral low-E glass helps keep rooms comfortable. On north-facing elevations, high light-transmission glass and slim frames make the most of limited winter daylight.
- Access and setting
- Large sliding panels are heavy and long, so city installations need planned access through the house, parking nearby and sometimes lifting equipment for upper floors or balconies. Flats need freeholder consent and planning permission, and acoustic glass helps on busy roads.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Derby
| Typical job | Guide price inc VAT |
|---|---|
| Aluminium slider, 1800 mm wide | £2,695 – £3,495 |
| Aluminium slider, 3000 mm wide | £3,995 – £5,095 |
| Lift-and-slide, 4000 mm wide | £6,695 – £8,595 |
| uPVC patio door, 1800 mm wide | £1,795 – £2,395 |
Get a guide price for your size
Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.
Options to choose between
Lift-and-slide doors
Panels lift off their seals to glide, then drop to seal tightly when closed; suited to very large, heavy glass panels.
Glass specification
Toughened low-E double glazing as standard, with triple glazing, laminated security glass, acoustic or solar-control glass available.
Multi-track configuration
Two, three or four tracks so several panels stack behind each other, opening one or both sides of the frame.
Sliding Doors in Derby: questions
Can I get sliding doors with a very slim frame?
Yes. Slimline aluminium sliding doors are designed with narrow outer frames and interlocks, and some systems hide part of the frame in the floor, walls or ceiling. Very slim systems need precise, level openings and strong support above, so the survey checks the lintel, floor and walls before recommending one.
Do sliding patio doors need building regulations approval?
Yes. Fully glazed replacement doors like these are controlled fittings under building regulations, so the work must meet energy and safety glazing standards. In England, an installer registered with a competent person scheme can self-certify the installation, or building control approves it. Widening an opening is structural and needs separate approval. Other UK nations set their own requirements.
What guarantee comes with sliding patio doors?
Manufacturer guarantees apply to the frames, coating, rollers, locks and sealed units, and the terms are confirmed in writing. Cover for rollers can depend on regular cleaning, so read the conditions. Guarantee terms for the installation are set out in writing with your quote, so you know exactly what is covered before you go ahead.
How long does it take to install sliding doors?
Replacing a typical set of sliding patio doors takes about a day on site, and large multi-panel or lift-and-slide systems can take longer, especially if lifting equipment is needed. The doors are made to order first, and the manufacturing lead time is confirmed in writing when you accept the quote.
Do you cover Derby for sliding doors?
Yes. We can quote for sliding doors across Derby and the surrounding Derbyshire area, including postcode districts DE1, DE22 and DE23, and nearby Belper, Ilkeston and Heanor. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Derby
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.