Call 0800 088 6248

Craigavon · County Armagh

Safety Glass in Craigavon

Need a glass panel made to measure in Craigavon? Our glaziers confirm the thickness, edge finish and holes before the glass is toughened.

  • BT64
  • BT65
  • BT66
  • Guide from £55

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Toughened glass table top across Craigavon

Toughened glass can, in rare cases, break without any obvious impact because of tiny nickel sulphide inclusions in the glass. Heat soak testing exposes the toughened glass to heat for a set period to break susceptible panes before supply, which reduces the risk without removing it completely.

Glass tabletops and shelves need the right thickness for the span and load. Thicker glass deflects less, so a long shelf or a large table needs a heavier panel than a small side table. The supplier confirms a suitable thickness for the use, not just the size.

Once glass has been toughened, it cannot be cut, drilled, notched or edge-worked. All shaping, holes for handles or hinges, and cut-outs for sockets must be finished on the float glass first. This is why accurate measuring and templates matter before any order is placed.

The price of safety glass depends on its size, thickness, whether it is toughened or laminated, the edge finish, the number of holes and cut-outs, any shapes or curves, and whether it is supplied only or fitted. Low-iron or tinted glass costs more than clear float.

Included as standard

  • Delivery or fitting by our glaziers
  • Glass cut, edge-worked and drilled before toughening
  • Measurement or templating of the glass panel
  • Advice on toughened or laminated glass for the location
Sheets of glass stored on a rack in a glass processing workshop

Craigavon at a glance

Postcodes covered
BT64, BT65, BT66 and the surrounding area, including Lurgan, Portadown and Banbridge
Coast
Craigavon is well inland, around 34 km from the nearest coast, so salt exposure is not usually a factor.
Daylight and sun
In Craigavon the midwinter sun reaches about 12° above the horizon at noon, with roughly 7.0 hours of daylight, rising to about 59° and 17.0 hours in midsummer. Strong sun on large glass panels can cause glare and fade furniture behind them. Tinted, solar control or low-iron toughened glass each change how much light, heat and colour come through, so orientation is worth considering when choosing.
Access and setting
Older rural homes often have internal doors and screens with old, unmarked glass. Upgrading them to toughened or laminated safety glass is common, and timber door frames may need careful beading when the new glass is fitted.
Rules in Northern Ireland
Technical Booklet V covers safety glazing in Northern Ireland, including glass in and around doors and low-level glazing where people could walk into it.

Guide prices in Craigavon

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
6 mm toughened panel, 800 × 600 mm£55 – £75
10 mm toughened panel, 1000 × 2000 mm£325 – £415
Glass tabletop or shelf, 1200 × 600 mm, 8 mm£135 – £165
6.4 mm laminated panel, 900 × 900 mm£115 – £145

Get a guide price for your size

For replacement doors and windows in Northern Ireland, PAS 24 products are a sensible choice for security.

Options to choose between

Holes and cut-outs

Drilled holes for handles, hinges and fixings, and cut-outs for sockets, all made before the glass is toughened.

Laminated safety glass

Two or more sheets bonded with an interlayer that holds broken glass in place, for overhead, security and fall-risk locations.

Heat soak testing

An extra heat test after toughening that reduces the risk of spontaneous breakage from nickel sulphide inclusions in the glass.

Safety Glass in Craigavon: questions

Why do I need to wait for toughened glass?

Toughened glass is made to order. Each panel is cut, edge-worked and drilled from float glass, then heated and cooled in a toughening furnace. It cannot be cut from stock once toughened. Your written quote shows the expected timescale, and the glazier will confirm fitting arrangements once the glass is ready.

Should I choose a polished or arrised edge?

Choose polished edges where the edge will be seen or touched, such as tabletops, shelves and frameless panels, because they are smooth and look neat. Arrised edges are lightly sanded to remove sharpness and are fine where the edge sits hidden in a frame. Bevelled edges are decorative and suit mirrors and some tabletops.

Can toughened glass break on its own?

Rarely, yes. Tiny nickel sulphide inclusions in the glass can expand over time and cause a toughened pane to break without an obvious impact. Edge damage during fitting can also cause later failure. Heat soak testing reduces the risk of inclusion-related breakage, and careful handling and correct fitting protect the edges.

Is laminated glass better for security?

Laminated glass usually gives better security than toughened glass of similar thickness, because the interlayer holds the glass together after it cracks, so making a hole takes more effort. Thicker interlayers and multi-layer laminates give more resistance. For ground-floor windows, shopfronts and doors, laminated glass is often chosen for this reason.

Do you cover Craigavon for safety glass?

Yes. We can quote for safety glass across Craigavon and the surrounding County Armagh area, including postcode districts BT64, BT65 and BT66, and nearby Lurgan, Portadown and Banbridge. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Craigavon

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote