Hampton · Greater London
uPVC Windows in Hampton
Landlords and homeowners in Hampton can get a written uPVC window quote that fixes the price for the frames, glass, colour and locks shown.
- TW12
- KT8
- TW11
- Guide from £565
Replacement uPVC windows in Hampton: what to know
Modern uPVC casements use multi-point espagnolette locks that engage keeps along the frame, internally beaded glass so units cannot be removed from outside, and key-locking handles. PAS 24 is the security standard expected for easily accessible windows in new homes in England, and it is a sensible benchmark for ground-floor replacements.
Windows are replaced room by room, so each opening is only exposed for a short spell. A single window is usually changed within a day, and a typical house takes a few days depending on the number of windows, bays and access. Inside, reveals are finished with trims, sealant or filler.
uPVC frames need washing a few times a year with warm soapy water and a drop of light oil on hinges and locking points. Drainage slots along the bottom of the outer frame let rainwater escape, so keep them clear of dirt and leaves to stop water collecting in the cill.
In England, Approved Document L sets the standard for a replacement window in an existing home: a U-value of 1.4 W/m²K or better, or a Window Energy Rating of band B or above. The new window should also be no worse than the one it replaces. The other UK nations set their own figures.
Included as standard
- Survey and measurement of every opening
- Sealing inside and out, with trims to make good
- Made-to-measure frames with sealed double glazed units
- Removal and disposal of the old windows
About Hampton for this job
- Postcodes covered
- TW12, KT8, TW11 and the surrounding area, including Hanworth, Sunbury-on-Thames and Walton-on-Thames
- Coast
- Hampton is well inland, around 51 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Hampton the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. uPVC frames are bulkier than aluminium, so they take a little more glass area from small windows. On south and west elevations, solar-control or neutral low-E glass limits overheating, while north-facing rooms benefit from high light-transmission glass and warm-edge spacers that reduce condensation.
- Access and setting
- Older rural cottages often have irregular openings, thick walls and timber lintels, so every frame is measured individually and the support above each opening is checked. Exposed hillside and open-field sites benefit from reinforced frames and careful sealing against driving rain.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Hampton
| Typical job | Guide price inc VAT |
|---|---|
| Casement window, 900 × 1050 mm | £565 – £725 |
| Casement window, 1200 × 1200 mm | £665 – £855 |
| Large window, 1800 × 1200 mm | £805 – £995 |
| Anthracite or woodgrain, 1200 × 1200 mm | £785 – £995 |
Get a guide price for your size
Replacing windows and doors with similar ones is usually permitted development for houses in England. Flats, listed buildings and homes in conservation areas or covered by an Article 4 direction can need permission, so check with the council first.
Specification choices
Woodgrain and colour foils
Grey, black, cream or woodgrain foils on one or both faces, so the frames can match a door or suit an older house.
Georgian or astragal bars
Bars set between the panes or applied to the faces of the glass for a traditional divided-pane look.
Tilt and turn
Opens inwards from the side for cleaning or escape, or tilts from the top for secure ventilation; practical for flats and upper floors.
uPVC Windows in Hampton: questions
How long does it take to fit uPVC windows?
Most single windows are changed within a day, and a typical house usually takes a few days. Bays, large picture windows and openings that need a tower or scaffold take longer. Manufacturing comes first, because every frame is made to the survey measurements, and the lead time is confirmed with your quote.
Will fitting new windows damage my plaster or decor?
Some disturbance is normal, but it is usually limited to the edges of each opening. The glazier cuts out the old frame, fits the new one and finishes the inside with trims, sealant or filler. Older frames set deep into plaster may need some plaster repair, and we flag that at survey so it is covered in the quote.
Do new uPVC windows need trickle vents?
In England, usually yes. Approved Document F expects ventilation after window replacement to be no worse than before, which normally means trickle vents in the new frames. Our glaziers record the existing ventilation at survey and specify vents to suit each room. Rules in the other UK nations differ, so the detail is confirmed for your address.
Are uPVC windows secure?
Modern uPVC windows can be very secure when they have multi-point locks, internal glazing beads, key-locking handles and laminated glass where needed. PAS 24 is the security standard expected for easily accessible windows in new homes in England. Ask for ground-floor windows tested to it, and avoid frames where the glass is beaded from outside.
Do you cover Hampton for uPVC windows?
Yes. We can quote for uPVC windows across Hampton and the surrounding Greater London area, including postcode districts TW12, KT8 and TW11, and nearby Hanworth, Sunbury-on-Thames and Walton-on-Thames. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Hampton
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.