Rochester · Kent
uPVC Windows in Rochester
Draughty or tired windows in Rochester can be replaced with made-to-measure uPVC frames, and our glaziers survey every opening before you receive a fixed written quote.
- ME1
- ME4
- ME5
- Guide from £565
White uPVC windows in Rochester
Windows are replaced room by room, so each opening is only exposed for a short spell. A single window is usually changed within a day, and a typical house takes a few days depending on the number of windows, bays and access. Inside, reveals are finished with trims, sealant or filler.
The price of uPVC windows depends mainly on size, the number of opening sashes, frame colour, glass specification and hardware. Bay windows, openings that need a tower or scaffold, and difficult removal of old frames add labour. See the guide prices for typical ranges; your written quote fixes the exact figure.
uPVC frames need washing a few times a year with warm soapy water and a drop of light oil on hinges and locking points. Drainage slots along the bottom of the outer frame let rainwater escape, so keep them clear of dirt and leaves to stop water collecting in the cill.
In England, Approved Document L sets the standard for a replacement window in an existing home: a U-value of 1.4 W/m²K or better, or a Window Energy Rating of band B or above. The new window should also be no worse than the one it replaces. The other UK nations set their own figures.
What's included
- Written guarantee terms and advice on building regulations sign-off
- Survey and measurement of every opening
- Made-to-measure frames with sealed double glazed units
- Sealing inside and out, with trims to make good
About Rochester for this job
- Postcodes covered
- ME1, ME4, ME5 and the surrounding area, including Chatham, Strood and Gillingham
- Coast
- Rochester is about 4 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt spray and wind-driven rain test seals, drainage and hardware. uPVC itself does not corrode, but stainless or coated locking parts, well-sealed joints around the frame and clear drainage slots matter, and exposed elevations may need frames with higher weather ratings.
- Daylight and sun
- In Rochester the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. uPVC frames are bulkier than aluminium, so they take a little more glass area from small windows. On south and west elevations, solar-control or neutral low-E glass limits overheating, while north-facing rooms benefit from high light-transmission glass and warm-edge spacers that reduce condensation.
- Access and setting
- Older rural cottages often have irregular openings, thick walls and timber lintels, so every frame is measured individually and the support above each opening is checked. Exposed hillside and open-field sites benefit from reinforced frames and careful sealing against driving rain.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Rochester
| Typical job | Guide price inc VAT |
|---|---|
| Casement window, 900 × 1050 mm | £565 – £725 |
| Casement window, 1200 × 1200 mm | £665 – £855 |
| Large window, 1800 × 1200 mm | £805 – £995 |
| Anthracite or woodgrain, 1200 × 1200 mm | £785 – £995 |
Get a guide price for your size
Listed buildings in England need listed building consent for most changes to historic windows or glass, and conservation areas can restrict changes visible from the street. Speak to the council's conservation officer before ordering.
Choosing your uPVC windows
Casement windows
Side-hung or top-hung sashes on friction hinges, suiting most houses, with easy-clean hinges that let upper-floor glass be cleaned from inside.
Double or triple glazing
Low-E double glazing suits most homes; triple glazing adds a third pane for lower heat loss and quieter rooms, but units are heavier.
Woodgrain and colour foils
Grey, black, cream or woodgrain foils on one or both faces, so the frames can match a door or suit an older house.
uPVC Windows in Rochester: questions
Can I fit uPVC windows myself?
You can, but the work still has to meet building regulations. In England and Wales, without an installer registered with a competent person scheme you need building control approval and inspection. Accurate measuring, correct packing, fixing and sealing all affect weather performance and how the locks work, and mistakes are hard to put right because frames are made to size and cannot be returned.
Can uPVC windows be fitted in a conservation area or listed building?
Sometimes, but consent may be needed first. Listed buildings need listed building consent for significant works, and conservation areas or Article 4 directions often restrict changes to front windows. Woodgrain foils or uPVC sliding sashes can occasionally satisfy a planning officer. Check with your council before ordering; the council can tell you what an application needs, and we can provide product details and specifications to support it.
Will fitting new windows damage my plaster or decor?
Some disturbance is normal, but it is usually limited to the edges of each opening. The glazier cuts out the old frame, fits the new one and finishes the inside with trims, sealant or filler. Older frames set deep into plaster may need some plaster repair, and we flag that at survey so it is covered in the quote.
What guarantee comes with new uPVC windows?
Manufacturer guarantees apply to new frames, sealed units and hardware, and the terms are confirmed in writing. Guarantee terms for the installation are set out in writing with your quote, so you know what is covered and for how long before you commit. Keep this paperwork with your building regulations certificate, because buyers' solicitors usually ask for both.
Do you cover Rochester for uPVC windows?
Yes. We can quote for uPVC windows across Rochester and the surrounding Kent area, including postcode districts ME1, ME4 and ME5, and nearby Chatham, Strood and Gillingham. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Rochester
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.