Call 0800 088 6248

Fleetwood · Lancashire

uPVC Windows in Fleetwood

If your windows in Fleetwood no longer lock, let rain in or stick when opened, we can survey them and quote for replacement uPVC frames.

  • FY7
  • FY5
  • Guide from £565

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

uPVC double glazed windows across Fleetwood

uPVC window frames are made from extruded profiles with several internal chambers that trap air and slow heat loss. Larger frames, and those on exposed elevations, are usually reinforced with steel or aluminium inside the profile so they stay straight and the locks keep engaging properly over the years.

uPVC frames need washing a few times a year with warm soapy water and a drop of light oil on hinges and locking points. Drainage slots along the bottom of the outer frame let rainwater escape, so keep them clear of dirt and leaves to stop water collecting in the cill.

In England, replacement windows on a house that look similar to the originals usually do not need planning permission. Flats and maisonettes do not have permitted development rights for replacing windows, and listed buildings, conservation areas and homes under an Article 4 direction may need consent, so check before ordering.

uPVC no longer means white only. Frames can be foiled in woodgrain or solid colours such as grey, black or cream, often outside only with white inside. Foils are bonded at the factory and should be cleaned with a soft cloth and mild detergent, because abrasive pads and solvents mark the surface.

What you get

  • Sealing inside and out, with trims to make good
  • Fitting, packing and fixing into the existing opening
  • Made-to-measure frames with sealed double glazed units
  • Removal and disposal of the old windows
Semi-detached house with white uPVC windows and bay windows

Local details for Fleetwood

Postcodes covered
FY7, FY5 and the surrounding area, including Thornton-Cleveleys, Poulton-le-Fylde and Blackpool
Coast
Fleetwood is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt spray and wind-driven rain test seals, drainage and hardware. uPVC itself does not corrode, but stainless or coated locking parts, well-sealed joints around the frame and clear drainage slots matter, and exposed elevations may need frames with higher weather ratings.
Daylight and sun
In Fleetwood the midwinter sun reaches about 13° above the horizon at noon, with roughly 7.1 hours of daylight, rising to about 60° and 16.9 hours in midsummer. uPVC frames are bulkier than aluminium, so they take a little more glass area from small windows. On south and west elevations, solar-control or neutral low-E glass limits overheating, while north-facing rooms benefit from high light-transmission glass and warm-edge spacers that reduce condensation.
Access and setting
Older rural cottages often have irregular openings, thick walls and timber lintels, so every frame is measured individually and the support above each opening is checked. Exposed hillside and open-field sites benefit from reinforced frames and careful sealing against driving rain.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Fleetwood

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Casement window, 900 × 1050 mm£565 – £725
Casement window, 1200 × 1200 mm£665 – £855
Large window, 1800 × 1200 mm£805 – £995
Anthracite or woodgrain, 1200 × 1200 mm£785 – £995

Get a guide price for your size

Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.

Specification choices

Casement windows

Side-hung or top-hung sashes on friction hinges, suiting most houses, with easy-clean hinges that let upper-floor glass be cleaned from inside.

uPVC sliding sash

Vertical sliders that mimic traditional box sashes, using spring balances instead of weights, where planning rules allow uPVC.

Georgian or astragal bars

Bars set between the panes or applied to the faces of the glass for a traditional divided-pane look.

uPVC Windows in Fleetwood: questions

Should I choose double or triple glazing?

Well-specified double glazing with low-E glass and warm-edge spacers can meet the energy standard for replacement windows, and the certified rating confirms it. Triple glazing adds a third pane, which helps on cold, noisy or north-facing elevations, but the units are heavier and need frames designed for them. We can quote both so you can compare.

Can uPVC windows be fitted in a conservation area or listed building?

Sometimes, but consent may be needed first. Listed buildings need listed building consent for significant works, and conservation areas or Article 4 directions often restrict changes to front windows. Woodgrain foils or uPVC sliding sashes can occasionally satisfy a planning officer. Check with your council before ordering; the council can tell you what an application needs, and we can provide product details and specifications to support it.

How long does it take to fit uPVC windows?

Most single windows are changed within a day, and a typical house usually takes a few days. Bays, large picture windows and openings that need a tower or scaffold take longer. Manufacturing comes first, because every frame is made to the survey measurements, and the lead time is confirmed with your quote.

Will fitting new windows damage my plaster or decor?

Some disturbance is normal, but it is usually limited to the edges of each opening. The glazier cuts out the old frame, fits the new one and finishes the inside with trims, sealant or filler. Older frames set deep into plaster may need some plaster repair, and we flag that at survey so it is covered in the quote.

Do you cover Fleetwood for uPVC windows?

Yes. We can quote for uPVC windows across Fleetwood and the surrounding Lancashire area, including postcode districts FY7 and FY5, and nearby Thornton-Cleveleys, Poulton-le-Fylde and Blackpool. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Fleetwood

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote