Oban · Argyll & Bute
Window Repairs in Oban
Draughty, rattling or hard-to-close windows in Oban can often be put right with new gaskets, adjusted keeps or replacement friction stays.
- PA34
- Guide from £65
Window handle replacement in Oban
Simple care keeps hardware working longer. Clean tracks and keeps, then apply a light lubricant to moving parts once or twice a year. Keep drainage slots clear. Avoid slamming doors or forcing handles, as this strains gearboxes and can cause a door to drop over time.
The cost of a window or door repair depends on the part needed, whether it is a standard or discontinued design, how easy it is to identify the make, the number of windows or doors, and access. Discontinued hardware sometimes needs a modern equivalent and adaptation to fit.
Most modern windows use an espagnolette lock: a metal bar in the sash edge that moves locking cams into keeps on the frame when the handle turns. If the handle feels stiff or spins freely, the gearbox or bar may be worn, rather than the handle itself.
Repairs usually take a single visit when the part can be identified and is carried on the van. Unusual or discontinued parts may need ordering. The glazier then returns to fit them, and in the meantime can usually leave the window or door secure and working.
What's included
- Matched replacement hinges, stays, handles or locks
- Survey and diagnosis of the faulty part
- Removal of old parts and packaging
- Check that windows and doors lock and seal
About Oban for this job
- Postcodes covered
- PA34 and the surrounding area, including Fort William, Dunoon and Gourock
- Coast
- Oban is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt air corrodes window and door hardware more quickly, especially hinges, keeps and lock mechanisms. Stainless steel friction stays and corrosion-resistant hardware last longer, and regular cleaning and lubrication help keep moving parts free.
- Daylight and sun
- In Oban the midwinter sun reaches about 10° above the horizon at noon, with roughly 6.6 hours of daylight, rising to about 57° and 17.4 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- Older rural homes may have timber casements, sash windows or doors with discontinued hardware, so parts may need matching or adapting. Exposed sites put more strain on hinges and seals, and outbuildings often benefit from upgraded locks.
- Rules in Scotland
- Security standards for doors and windows apply to new homes in Scotland; for replacements, PAS 24 products are a sensible choice.
Guide prices in Oban
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Where a window provides an escape route, its replacement in Scotland should give at least the same escape opening as before.
Specification choices
Multipoint door lock
A new gearbox or full locking strip for uPVC and composite doors that stick, will not lock or have a loose handle.
Gaskets and draught seals
Replacement seals matched to the frame profile to stop draughts, rattles and noise around opening windows and doors.
Friction stay replacement
New hinges for uPVC and aluminium casement windows, matched for length and stack height, including egress stays for escape windows.
Window Repairs in Oban: questions
Why has my uPVC door dropped and can it be fixed?
Doors drop when hinges wear or loosen, or when the glass or panel slips inside the door and stops supporting it square. Signs include dragging on the threshold and needing to lift the handle hard to lock. Most dropped doors can be fixed by adjusting the hinges and repacking the glass or panel, without replacing the door.
How can I stop draughts from my existing windows?
Draughts often come from worn gaskets, a sash that has dropped or keeps that no longer pull the sash tight. Replacing the gaskets with a matching profile and adjusting the keeps or hinges usually fixes the problem. If draughts come through the frame or glass seals, the glazier will say what else needs attention.
Can you find parts for old or discontinued windows?
Often, yes. Many hinges, locks and gearboxes are made to common sizes, and modern equivalents exist for many older designs. The glazier measures key dimensions such as backset, length and stack height. If an exact match is not available, the quote will explain the nearest option and any adaptation needed.
What does it cost to replace a window hinge or door lock?
The cost depends on the part, whether it is standard or discontinued, how many windows or doors need work, and access. Gearboxes and full multipoint strips cost more than a single handle or cylinder. See the guide prices for typical repairs, then get a written quote once the glazier has identified the exact part needed.
Do you cover Oban for window repairs?
Yes. We can quote for window repairs across Oban and the surrounding Argyll & Bute area, including postcode districts PA34, and nearby Fort William, Dunoon and Gourock. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Oban
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.