Tenby · Dyfed
Window Repairs in Tenby
Draughty, rattling or hard-to-close windows in Tenby can often be put right with new gaskets, adjusted keeps or replacement friction stays.
- SA70
- SA69
- Guide from £65
Tenby: door lock repair
Euro cylinders are the key barrels in most uPVC and composite doors. Standard cylinders can be vulnerable to lock snapping. Cylinders tested to TS 007 with a 3-star rating, or certified to Sold Secure SS312 Diamond, are designed to resist this type of attack.
Draught seals and gaskets compress and shrink over time, letting in cold air and noise. Replacing them with a matching profile restores the seal without changing the window. The glazier checks the gasket type, as frames from different makers often use different profiles.
The cost of a window or door repair depends on the part needed, whether it is a standard or discontinued design, how easy it is to identify the make, the number of windows or doors, and access. Discontinued hardware sometimes needs a modern equivalent and adaptation to fit.
Most modern windows use an espagnolette lock: a metal bar in the sash edge that moves locking cams into keeps on the frame when the handle turns. If the handle feels stiff or spins freely, the gearbox or bar may be worn, rather than the handle itself.
What you get
- Written quote fixing the price for parts and work
- Survey and diagnosis of the faulty part
- Check that windows and doors lock and seal
- Matched replacement hinges, stays, handles or locks
Tenby at a glance
- Postcodes covered
- SA70, SA69 and the surrounding area, including Pembroke Dock, Milford Haven and Haverfordwest
- Coast
- Tenby is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt air corrodes window and door hardware more quickly, especially hinges, keeps and lock mechanisms. Stainless steel friction stays and corrosion-resistant hardware last longer, and regular cleaning and lubrication help keep moving parts free.
- Daylight and sun
- In Tenby the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- Older rural homes may have timber casements, sash windows or doors with discontinued hardware, so parts may need matching or adapting. Exposed sites put more strain on hinges and seals, and outbuildings often benefit from upgraded locks.
- Rules in Wales
- Security rules for doors and windows differ between the UK nations. For replacement doors and windows in Wales, products tested to PAS 24 are a sensible benchmark.
Guide prices in Tenby
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Where a window is an escape route, its replacement in Wales should give at least the same escape opening as before.
Choosing your window repairs
Anti-snap euro cylinder
A cylinder tested to resist snapping, such as TS 007 3-star or Sold Secure SS312 Diamond, cut to fit your door.
Espagnolette lock and gearbox
Replacement locking bar or gearbox for windows that will not lock, have a spinning handle or feel stiff to operate.
Multipoint door lock
A new gearbox or full locking strip for uPVC and composite doors that stick, will not lock or have a loose handle.
Window Repairs in Tenby: questions
How do I look after window and door hardware?
Clean dirt from tracks, keeps and hinges, then apply a light machine oil or silicone spray to moving parts once or twice a year. Keep frame drainage slots clear. Do not force handles that feel stiff, as this can break gearboxes. Report a dropping door or sticking handle early, as small adjustments are easier than replacing parts.
Can you repair a uPVC window that will not close properly?
Usually, yes. Windows that will not close are most often caused by worn or bent friction stays, a sash that has dropped, or a locking cam catching the keep. The glazier identifies the fault, then replaces the hinges, adjusts the keeps or repacks the sash so it closes and locks properly again, keeping the existing frame and glass.
Can you find parts for old or discontinued windows?
Often, yes. Many hinges, locks and gearboxes are made to common sizes, and modern equivalents exist for many older designs. The glazier measures key dimensions such as backset, length and stack height. If an exact match is not available, the quote will explain the nearest option and any adaptation needed.
Is my euro cylinder lock secure?
Many older euro cylinders can be snapped, which lets an intruder open the door. Look for markings on the cylinder face. A TS 007 3-star mark, or certification to Sold Secure SS312 Diamond, shows the cylinder has been tested to resist snapping. The glazier can check and replace the cylinder with one cut to fit your door.
Do you cover Tenby for window repairs?
Yes. We can quote for window repairs across Tenby and the surrounding Dyfed area, including postcode districts SA70 and SA69, and nearby Pembroke Dock, Milford Haven and Haverfordwest. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Tenby
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.