Dunbar · Edinburgh & the Lothians
Window Repairs in Dunbar
Our glaziers can repair windows and doors across Dunbar, matching hinges, locks and seals to your existing frames so everything works and seals properly again.
- EH42
- Guide from £65
uPVC window repairs across Dunbar
Friction stays are the hinges on most uPVC and aluminium casement windows. When the sliding shoe wears or the arms bend, the window drops, binds or will not stay open. Replacements must match the stay's length, stack height and type, which the glazier measures before ordering.
Euro cylinders are the key barrels in most uPVC and composite doors. Standard cylinders can be vulnerable to lock snapping. Cylinders tested to TS 007 with a 3-star rating, or certified to Sold Secure SS312 Diamond, are designed to resist this type of attack.
A uPVC or composite door with a multipoint lock has one central gearbox that drives hooks, rollers or bolts along the door edge. A failed gearbox can leave the door stuck locked or unable to lock. In many cases only the gearbox needs replacing, not the whole strip.
Draught seals and gaskets compress and shrink over time, letting in cold air and noise. Replacing them with a matching profile restores the seal without changing the window. The glazier checks the gasket type, as frames from different makers often use different profiles.
What's included
- Removal of old parts and packaging
- Matched replacement hinges, stays, handles or locks
- Check that windows and doors lock and seal
- Written quote fixing the price for parts and work
Working in Dunbar
- Postcodes covered
- EH42 and the surrounding area, including Tranent, Eyemouth and Musselburgh
- Coast
- Dunbar is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt air corrodes window and door hardware more quickly, especially hinges, keeps and lock mechanisms. Stainless steel friction stays and corrosion-resistant hardware last longer, and regular cleaning and lubrication help keep moving parts free.
- Daylight and sun
- In Dunbar the midwinter sun reaches about 11° above the horizon at noon, with roughly 6.7 hours of daylight, rising to about 57° and 17.3 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- Older rural homes may have timber casements, sash windows or doors with discontinued hardware, so parts may need matching or adapting. Exposed sites put more strain on hinges and seals, and outbuildings often benefit from upgraded locks.
- Rules in Scotland
- Security standards for doors and windows apply to new homes in Scotland; for replacements, PAS 24 products are a sensible choice.
Guide prices in Dunbar
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Where a window provides an escape route, its replacement in Scotland should give at least the same escape opening as before.
Options to choose between
Friction stay replacement
New hinges for uPVC and aluminium casement windows, matched for length and stack height, including egress stays for escape windows.
Sash cords and balances
New cords, weights or spring balances for sash windows that drop, stick or will not stay in position.
Handles and window restrictors
New locking handles for windows and doors, and restrictors that limit how far upper-floor windows open.
Window Repairs in Dunbar: questions
My door handle spins and the door will not lock. What is wrong?
A handle that spins without moving the lock usually means the gearbox inside the door has failed, or the spindle connecting handle and gearbox has broken. The gearbox can often be replaced on its own. If the door is stuck locked, the glazier can usually open it without damaging the frame before fitting the new part.
Can you repair a uPVC window that will not close properly?
Usually, yes. Windows that will not close are most often caused by worn or bent friction stays, a sash that has dropped, or a locking cam catching the keep. The glazier identifies the fault, then replaces the hinges, adjusts the keeps or repacks the sash so it closes and locks properly again, keeping the existing frame and glass.
Can you find parts for old or discontinued windows?
Often, yes. Many hinges, locks and gearboxes are made to common sizes, and modern equivalents exist for many older designs. The glazier measures key dimensions such as backset, length and stack height. If an exact match is not available, the quote will explain the nearest option and any adaptation needed.
Is my euro cylinder lock secure?
Many older euro cylinders can be snapped, which lets an intruder open the door. Look for markings on the cylinder face. A TS 007 3-star mark, or certification to Sold Secure SS312 Diamond, shows the cylinder has been tested to resist snapping. The glazier can check and replace the cylinder with one cut to fit your door.
Do you cover Dunbar for window repairs?
Yes. We can quote for window repairs across Dunbar and the surrounding Edinburgh & the Lothians area, including postcode districts EH42, and nearby Tranent, Eyemouth and Musselburgh. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Dunbar
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.