Andover · Hampshire
Window Repairs in Andover
A spinning handle or stuck lock in Andover is often a failed gearbox, and we can quote to replace the part and keep your existing door.
- SP10
- Guide from £65
Andover: door lock repair
The cost of a window or door repair depends on the part needed, whether it is a standard or discontinued design, how easy it is to identify the make, the number of windows or doors, and access. Discontinued hardware sometimes needs a modern equivalent and adaptation to fit.
Draught seals and gaskets compress and shrink over time, letting in cold air and noise. Replacing them with a matching profile restores the seal without changing the window. The glazier checks the gasket type, as frames from different makers often use different profiles.
Repairs usually take a single visit when the part can be identified and is carried on the van. Unusual or discontinued parts may need ordering. The glazier then returns to fit them, and in the meantime can usually leave the window or door secure and working.
Euro cylinders are the key barrels in most uPVC and composite doors. Standard cylinders can be vulnerable to lock snapping. Cylinders tested to TS 007 with a 3-star rating, or certified to Sold Secure SS312 Diamond, are designed to resist this type of attack.
What a typical job includes
- Adjustment of dropped or sticking doors and sashes
- Written quote fixing the price for parts and work
- Removal of old parts and packaging
- Matched replacement hinges, stays, handles or locks
About Andover for this job
- Postcodes covered
- SP10 and the surrounding area, including Winchester, Newbury and Salisbury
- Coast
- Andover is well inland, around 35 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Andover the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- Older rural homes may have timber casements, sash windows or doors with discontinued hardware, so parts may need matching or adapting. Exposed sites put more strain on hinges and seals, and outbuildings often benefit from upgraded locks.
- Rules in England
- Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Guide prices in Andover
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Options to choose between
Anti-snap euro cylinder
A cylinder tested to resist snapping, such as TS 007 3-star or Sold Secure SS312 Diamond, cut to fit your door.
Espagnolette lock and gearbox
Replacement locking bar or gearbox for windows that will not lock, have a spinning handle or feel stiff to operate.
Multipoint door lock
A new gearbox or full locking strip for uPVC and composite doors that stick, will not lock or have a loose handle.
Window Repairs in Andover: questions
Can you repair a uPVC window that will not close properly?
Usually, yes. Windows that will not close are most often caused by worn or bent friction stays, a sash that has dropped, or a locking cam catching the keep. The glazier identifies the fault, then replaces the hinges, adjusts the keeps or repacks the sash so it closes and locks properly again, keeping the existing frame and glass.
Is my euro cylinder lock secure?
Many older euro cylinders can be snapped, which lets an intruder open the door. Look for markings on the cylinder face. A TS 007 3-star mark, or certification to Sold Secure SS312 Diamond, shows the cylinder has been tested to resist snapping. The glazier can check and replace the cylinder with one cut to fit your door.
What does it cost to replace a window hinge or door lock?
The cost depends on the part, whether it is standard or discontinued, how many windows or doors need work, and access. Gearboxes and full multipoint strips cost more than a single handle or cylinder. See the guide prices for typical repairs, then get a written quote once the glazier has identified the exact part needed.
My door handle spins and the door will not lock. What is wrong?
A handle that spins without moving the lock usually means the gearbox inside the door has failed, or the spindle connecting handle and gearbox has broken. The gearbox can often be replaced on its own. If the door is stuck locked, the glazier can usually open it without damaging the frame before fitting the new part.
Do you cover Andover for window repairs?
Yes. We can quote for window repairs across Andover and the surrounding Hampshire area, including postcode districts SP10, and nearby Winchester, Newbury and Salisbury. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Andover
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.