Wells · Somerset
Window Repairs in Wells
Our glaziers can repair windows and doors across Wells, matching hinges, locks and seals to your existing frames so everything works and seals properly again.
- BA5
- Guide from £65
Door lock repair in Wells: what to know
Draught seals and gaskets compress and shrink over time, letting in cold air and noise. Replacing them with a matching profile restores the seal without changing the window. The glazier checks the gasket type, as frames from different makers often use different profiles.
Friction stays are the hinges on most uPVC and aluminium casement windows. When the sliding shoe wears or the arms bend, the window drops, binds or will not stay open. Replacements must match the stay's length, stack height and type, which the glazier measures before ordering.
Simple care keeps hardware working longer. Clean tracks and keeps, then apply a light lubricant to moving parts once or twice a year. Keep drainage slots clear. Avoid slamming doors or forcing handles, as this strains gearboxes and can cause a door to drop over time.
A door that drags on the threshold, catches the frame or needs lifting to lock has usually dropped. Doors can often be adjusted using the hinges and by repacking the glass or panel so the door sits square again. Adjustment is usually tried before replacing parts.
What you get
- Matched replacement hinges, stays, handles or locks
- Check that windows and doors lock and seal
- Written quote fixing the price for parts and work
- Removal of old parts and packaging
About Wells for this job
- Postcodes covered
- BA5 and the surrounding area, including Shepton Mallet, Street and Frome
- Coast
- Wells is well inland, around 25 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Wells the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- Older rural homes may have timber casements, sash windows or doors with discontinued hardware, so parts may need matching or adapting. Exposed sites put more strain on hinges and seals, and outbuildings often benefit from upgraded locks.
- Rules in England
- Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Guide prices in Wells
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Specification choices
Friction stay replacement
New hinges for uPVC and aluminium casement windows, matched for length and stack height, including egress stays for escape windows.
Espagnolette lock and gearbox
Replacement locking bar or gearbox for windows that will not lock, have a spinning handle or feel stiff to operate.
Handles and window restrictors
New locking handles for windows and doors, and restrictors that limit how far upper-floor windows open.
Window Repairs in Wells: questions
How can I stop draughts from my existing windows?
Draughts often come from worn gaskets, a sash that has dropped or keeps that no longer pull the sash tight. Replacing the gaskets with a matching profile and adjusting the keeps or hinges usually fixes the problem. If draughts come through the frame or glass seals, the glazier will say what else needs attention.
Do replacement window hinges need to allow escape in a fire?
In England, upper-floor bedroom windows are often relied on as escape windows. Replacement hinges should not reduce the opening below what the window gave before. Egress friction stays open wider than standard stays to give a clear opening, so the glazier checks the room and window before choosing the hinge type.
Why has my uPVC door dropped and can it be fixed?
Doors drop when hinges wear or loosen, or when the glass or panel slips inside the door and stops supporting it square. Signs include dragging on the threshold and needing to lift the handle hard to lock. Most dropped doors can be fixed by adjusting the hinges and repacking the glass or panel, without replacing the door.
Can you repair a uPVC window that will not close properly?
Usually, yes. Windows that will not close are most often caused by worn or bent friction stays, a sash that has dropped, or a locking cam catching the keep. The glazier identifies the fault, then replaces the hinges, adjusts the keeps or repacks the sash so it closes and locks properly again, keeping the existing frame and glass.
Do you cover Wells for window repairs?
Yes. We can quote for window repairs across Wells and the surrounding Somerset area, including postcode districts BA5, and nearby Shepton Mallet, Street and Frome. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Wells
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.