Solihull · West Midlands
Window Repairs in Solihull
Our glaziers can repair windows and doors across Solihull, matching hinges, locks and seals to your existing frames so everything works and seals properly again.
- B91
- B92
- B90
- Guide from £65
uPVC window repairs across Solihull
The cost of a window or door repair depends on the part needed, whether it is a standard or discontinued design, how easy it is to identify the make, the number of windows or doors, and access. Discontinued hardware sometimes needs a modern equivalent and adaptation to fit.
Sash windows run on cords and weights or on spring balances. A broken cord leaves the sash heavy or loose, and a weak balance makes it slide down. Replacing cords, rehanging the sash and easing the beads can make a sash window run smoothly again.
Simple care keeps hardware working longer. Clean tracks and keeps, then apply a light lubricant to moving parts once or twice a year. Keep drainage slots clear. Avoid slamming doors or forcing handles, as this strains gearboxes and can cause a door to drop over time.
Most modern windows use an espagnolette lock: a metal bar in the sash edge that moves locking cams into keeps on the frame when the handle turns. If the handle feels stiff or spins freely, the gearbox or bar may be worn, rather than the handle itself.
What's included
- Matched replacement hinges, stays, handles or locks
- Check that windows and doors lock and seal
- Removal of old parts and packaging
- Written quote fixing the price for parts and work
Solihull at a glance
- Postcodes covered
- B91, B92, B90 and the surrounding area, including Shirley, Acocks Green and Washwood Heath
- Coast
- Solihull is well inland, around 82 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Solihull the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- In flats and terraced homes, working on upper-floor windows may need to be done from inside. Security matters on street-facing doors, so anti-snap cylinders and secure handles are worth considering. Parking near the property can affect access.
- Rules in England
- Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Guide prices in Solihull
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Options to choose between
Multipoint door lock
A new gearbox or full locking strip for uPVC and composite doors that stick, will not lock or have a loose handle.
Anti-snap euro cylinder
A cylinder tested to resist snapping, such as TS 007 3-star or Sold Secure SS312 Diamond, cut to fit your door.
Gaskets and draught seals
Replacement seals matched to the frame profile to stop draughts, rattles and noise around opening windows and doors.
Window Repairs in Solihull: questions
How can I stop draughts from my existing windows?
Draughts often come from worn gaskets, a sash that has dropped or keeps that no longer pull the sash tight. Replacing the gaskets with a matching profile and adjusting the keeps or hinges usually fixes the problem. If draughts come through the frame or glass seals, the glazier will say what else needs attention.
Can you find parts for old or discontinued windows?
Often, yes. Many hinges, locks and gearboxes are made to common sizes, and modern equivalents exist for many older designs. The glazier measures key dimensions such as backset, length and stack height. If an exact match is not available, the quote will explain the nearest option and any adaptation needed.
Can you repair a uPVC window that will not close properly?
Usually, yes. Windows that will not close are most often caused by worn or bent friction stays, a sash that has dropped, or a locking cam catching the keep. The glazier identifies the fault, then replaces the hinges, adjusts the keeps or repacks the sash so it closes and locks properly again, keeping the existing frame and glass.
Do replacement window hinges need to allow escape in a fire?
In England, upper-floor bedroom windows are often relied on as escape windows. Replacement hinges should not reduce the opening below what the window gave before. Egress friction stays open wider than standard stays to give a clear opening, so the glazier checks the room and window before choosing the hinge type.
Do you cover Solihull for window repairs?
Yes. We can quote for window repairs across Solihull and the surrounding West Midlands area, including postcode districts B91, B92 and B90, and nearby Shirley, Acocks Green and Washwood Heath. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Solihull
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.