Mold · Clwyd
Aluminium Windows in Mold
Planning an extension or renovation in Mold? We can supply and fit aluminium windows made to your sizes, with dual-colour frames and glass chosen room by room.
- CH7
- Guide from £925
Slim aluminium windows for homes and businesses in Mold
Aluminium windows are fabricated to order: profiles are cut, coated, assembled and glazed to the survey sizes. Lead times can be longer than for standard white uPVC, particularly for special colours or steel-look designs, and the expected timescale is confirmed in writing when you accept the quote.
Modern aluminium window frames contain a thermal break: strips of low-conductivity material, usually polyamide, that separate the inner and outer aluminium. Without it, heat passes straight through the metal. Older aluminium windows made without thermal breaks are a common cause of cold frames and streaming condensation.
Powder-coated aluminium does not need painting, but it does need cleaning. Wash frames with warm water and a mild detergent a few times a year, rinse, and avoid abrasive pads or solvents. Clean more often near the sea or busy roads, where salt and grime sit on the surface for longer.
Aluminium frames are usually finished with polyester powder coating, baked on at the factory in a choice of RAL colours and in matt, satin or textured finishes. Dual-colour frames are possible, such as anthracite grey outside and white inside, so the windows can suit both the street and the room.
What you get
- Removal and disposal of the existing windows
- Survey, measuring and structural check of each opening
- Sealed double or triple glazed units to specification
- Fitting, sealing and finishing the reveals neatly
About Mold for this job
- Postcodes covered
- CH7 and the surrounding area, including Buckley, Deeside and Hawarden
- Coast
- Mold sits roughly 10 km from the nearest coastline, close enough that exposure on open or high ground is worth considering. Salt air attacks metal finishes, so aluminium windows near the coast need a coating and pretreatment suited to marine exposure, stainless or protected hardware, and more frequent washing. Check that the coating terms allow for a coastal site before ordering.
- Daylight and sun
- In Mold the midwinter sun reaches about 13° above the horizon at noon, with roughly 7.3 hours of daylight, rising to about 60° and 16.7 hours in midsummer. Slim aluminium frames let more daylight through the same opening. Large south or west-facing panes can overheat rooms, so solar-control glass may help, while north-facing rooms benefit from high light-transmission low-E glass that keeps heat in during short winter days.
- Access and setting
- Rural homes often mix old stone walls with modern extensions, and aluminium suits both when profiles are chosen carefully. Irregular openings are measured individually, and exposed sites benefit from systems with high weather ratings and well-sealed joints against driving rain.
- Rules in Wales
- In Wales, Approved Document N covers safety glazing: safety glass is needed in and around doors and in low-level glazing where people could walk into it.
Guide prices in Mold
| Typical job | Guide price inc VAT |
|---|---|
| Casement window, 900 × 1050 mm | £925 – £1,195 |
| Casement window, 1200 × 1200 mm | £1,095 – £1,395 |
| Large window, 1800 × 1500 mm | £1,495 – £1,995 |
| Slimline heritage style, 1200 × 1200 mm | £1,295 – £1,695 |
Get a guide price for your size
Wales sets its own energy standards in the Welsh Approved Document L. Replacement windows, doors and rooflights must meet the limiting values set there, which your quote will reference.
Options to choose between
Glass upgrades
Triple glazing, laminated acoustic glass, solar-control coatings or obscure glass, chosen per window to suit the room and elevation.
Steel-look windows
Very slim frames with glazing bars that mimic traditional metal windows, adding thermal performance and double glazing to the classic look.
Flush casement
Sashes sit level with the outer frame for a clean, timber-like look, often chosen for period-style or contemporary homes.
Aluminium Windows in Mold: questions
How much do aluminium windows cost?
The cost of aluminium windows depends on the number and size of windows, the profile system, how many sashes open, the colour and finish, the glass and the access. They generally cost more than equivalent uPVC because of the material and factory coating. See the guide prices for typical ranges; the written quote fixes the price for your exact specification.
Are aluminium windows better than uPVC?
Neither is better for every home; they suit different priorities. Aluminium gives slimmer frames, larger glass areas, a hard-wearing powder-coated finish and a wide colour choice. uPVC usually costs less and has chunkier frames. Both can meet the energy standard for replacement windows when specified correctly, so compare the certified ratings, the look you want and the guide prices.
Do aluminium windows get condensation on the frames?
Modern thermally broken aluminium windows are far less prone to frame condensation than older aluminium windows made without a thermal break. Condensation can still form on any window if a room is humid and poorly ventilated, so trickle vents, extractor fans and sensible heating still matter. Warm-edge spacer bars also help keep the edges of the glass warmer.
Can aluminium windows replace original steel windows?
Yes, steel-look aluminium windows are designed for this. They copy the slim frames and glazing bars of old metal windows while adding double glazing and a thermal break. Original steel frames are often set into the masonry, so removal can disturb render or plaster, and the survey checks this. Listed buildings and conservation areas may need consent first.
Do you cover Mold for aluminium windows?
Yes. We can quote for aluminium windows across Mold and the surrounding Clwyd area, including postcode districts CH7, and nearby Buckley, Deeside and Hawarden. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Mold
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.