County Tyrone · Northern Ireland
Bespoke Mirrors in County Tyrone
Mirrors with black edges in County Tyrone cannot be restored, but we can measure and replace them with new mirror bonded using a compatible adhesive to protect the silver.
- Guide from £205
- 4 towns covered
- Postcode areas BT
Gym wall mirrors in County Tyrone: what to know
A safety-backed mirror has a film bonded across its back that holds the pieces together if the glass breaks, so fragments stay on the backing instead of falling or scattering. Some backing films are classified for impact under BS EN 12600, and the film is applied before fitting.
Templating lets a mirror follow sloping ceilings, curved alcoves, skirting lines and fitted furniture. Cut-outs for sockets and switches are marked on the template, and the faceplates are removed and refitted so the mirror sits neatly behind them.
Edge finish affects both look and safety. Flat polished edges suit frameless mirrors and mirror walls, bevelled edges add an angled border that catches the light, and a simple arrised edge takes the sharpness off edges that will be hidden by a frame or channel.
Large mirrors are usually fixed with mirror adhesive and supported at the base by a slim channel or clips while the adhesive cures and afterwards. Smaller mirrors can be screw-fixed through drilled holes with decorative caps, which also lets them be removed later.
What applies in County Tyrone
Technical Booklet V covers safety glazing in Northern Ireland, including glass in and around doors and low-level glazing where people could walk into it.
Parts of County Tyrone are within about 20 km of the coast, where exposure to wind and salt air is worth planning for. Mirrors are fitted indoors, but salty, humid coastal air can still reach the silver backing through exposed edges, particularly in bathrooms and near entrances. Protected edges, a compatible adhesive and good ventilation all help prevent black edge corrosion.
Older rural homes often have uneven walls of stone or lime plaster, which can distort a bonded mirror unless the wall is levelled or a backing board is used. Damp solid walls also need checking before a mirror is fixed to them.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Polished mirror, 1200 × 900 mm | £205 – £265 |
| Safety-backed mirror, 1800 × 1000 mm | £365 – £465 |
| Gym mirror wall, 4000 × 2000 mm | £995 – £1,295 |
Choosing your bespoke mirrors
Low-iron mirror
Mirror made on low-iron glass, which reduces the slight green cast of standard glass for a brighter, more colour-accurate reflection.
Bevelled edge
An angled border ground and polished around the edge that catches the light and frames the mirror without needing a separate frame.
Clear silver mirror
Standard silver-coated float glass mirror, cut to size, suited to most rooms, wardrobes and wall mirrors where a true, neutral reflection is wanted.
Heated demister pad
A thin heating pad bonded behind a bathroom mirror to keep an area clear of steam, wired in by a qualified electrician.
Bespoke Mirrors in County Tyrone: questions
Can a mirror be cut around sockets and light switches?
Yes. We mark socket and switch positions on the template, cut the openings in the mirror, then remove and refit the faceplates so the mirror sits neatly behind them with the power isolated. If sockets need moving or adding, a qualified electrician should do that before we template so the cut-outs line up.
How long does a bespoke mirror take?
Plain mirrors cut to size are often ready soon after measuring, while bevelled, tinted, safety-backed or shaped mirrors take longer to process. Fitting is usually completed in a single visit, though full gym or studio walls can take longer. Your written quote sets out the expected timescale, and we confirm the date when the mirror is ready.
What is a safety-backed mirror and do I need one?
A safety-backed mirror has a film bonded across its back that holds the pieces together if the glass breaks. You should consider one wherever someone could knock or fall against the mirror, such as wardrobe doors, full-height mirrors, gyms, dance studios and children's rooms. We recommend it at survey when the position or use of the room calls for it.
Why do mirrors go black around the edges?
Black edges are corrosion of the silver layer behind the glass, usually caused by moisture or cleaning fluid getting into the edges, or by an adhesive that reacts with the backing. Bathrooms are especially at risk because of steam. The damage cannot be reversed, so the mirror needs replacing, ideally with better edge protection and a compatible adhesive.
Which parts of County Tyrone do you cover for bespoke mirrors?
We cover the whole of County Tyrone, including Omagh, Strabane, Dungannon and Cookstown, and postcode areas BT. Building rules for bespoke mirrors here follow the regulations for Northern Ireland. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in County Tyrone
- Replacement Glass in County Tyrone
- Misted Glass Repair in County Tyrone
- Emergency Glazing in County Tyrone
- Safety Glass in County Tyrone
- Window Repairs in County Tyrone
- Window Film in County Tyrone
- uPVC Windows in County Tyrone
- Aluminium Windows in County Tyrone
- Sash Windows in County Tyrone
- Composite Doors in County Tyrone
- Bifold Doors in County Tyrone
- Sliding Doors in County Tyrone
- Secondary Glazing in County Tyrone
- Roof Lanterns in County Tyrone
- Glass Balustrades in County Tyrone
- Frameless Glass in County Tyrone
- Shower Screens in County Tyrone
- Glass Splashbacks in County Tyrone
- Glass Roofs in County Tyrone
- Shopfront Glazing in County Tyrone
- Curtain Walling in County Tyrone
- Glass Partitions in County Tyrone
- Property Glazing in County Tyrone
All glazing in County Tyrone · Bespoke Mirrors across the UK
Get a written quote in County Tyrone
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.