Brighton & Hove · East Sussex
Bespoke Mirrors in Brighton & Hove
Our glaziers fit bespoke mirrors in Brighton & Hove for homes and businesses, including tinted, antique-effect and bevelled mirrors cut around sockets and fitted furniture.
- BN1
- BN3
- BN2
- Guide from £205
Mirror cut to size in Brighton & Hove: what to know
Large mirrors are usually fixed with mirror adhesive and supported at the base by a slim channel or clips while the adhesive cures and afterwards. Smaller mirrors can be screw-fixed through drilled holes with decorative caps, which also lets them be removed later.
A safety-backed mirror has a film bonded across its back that holds the pieces together if the glass breaks, so fragments stay on the backing instead of falling or scattering. Some backing films are classified for impact under BS EN 12600, and the film is applied before fitting.
A bonded mirror follows the surface behind it, so an uneven wall can bend the reflection. We check flatness at survey, and on uneven plaster or stone walls the mirror may need a flat backing board or the wall levelling first to avoid a wavy, distorted image.
Most mirrors for internal use are made from silver-coated float glass covered by BS EN 1036-1, which sets definitions, quality requirements and test methods, including resistance to damp and corrosion. Mirror for bathrooms or other humid areas should come from a supplier whose product meets that standard.
Included as standard
- Survey, measuring or templating of the wall or recess
- Safety backing film where the position calls for it
- Mirror cut to size with your chosen edge finish
- Final clean and advice on protecting the edges
About Brighton & Hove for this job
- Postcodes covered
- BN1, BN3, BN2 and the surrounding area, including Burgess Hill, Worthing and Seaford
- Coast
- Brighton & Hove is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Mirrors are fitted indoors, but salty, humid coastal air can still reach the silver backing through exposed edges, particularly in bathrooms and near entrances. Protected edges, a compatible adhesive and good ventilation all help prevent black edge corrosion.
- Daylight and sun
- In Brighton & Hove the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 63° and 16.3 hours in midsummer. A mirror opposite or beside a window reflects daylight deeper into a room, which helps dark north-facing spaces through winter. Low direct sun on a large mirror can cause glare, so its position and any tint are worth considering.
- Access and setting
- Large mirrors for flats, salons and gyms often have to travel through narrow stairwells and small lifts, so walls may be covered in several panels with planned joints. Loading limits and building working hours can affect fitting times.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Brighton & Hove
| Typical job | Guide price inc VAT |
|---|---|
| Polished mirror, 1200 × 900 mm | £205 – £265 |
| Safety-backed mirror, 1800 × 1000 mm | £365 – £465 |
| Gym mirror wall, 4000 × 2000 mm | £995 – £1,295 |
Choosing your bespoke mirrors
Bevelled edge
An angled border ground and polished around the edge that catches the light and frames the mirror without needing a separate frame.
Antique-effect mirror
Mirror with a deliberately aged, mottled finish, giving a vintage look for feature walls, alcoves and period-style rooms.
Low-iron mirror
Mirror made on low-iron glass, which reduces the slight green cast of standard glass for a brighter, more colour-accurate reflection.
Bespoke Mirrors in Brighton & Hove: questions
How should I clean a mirror without damaging it?
Spray glass cleaner onto a soft, lint-free cloth rather than directly onto the mirror, then wipe and buff dry. That stops liquid running down and soaking into the bottom edge, which is where black edges usually start. Avoid abrasive pads and harsh chemical cleaners, and dry the edges after cleaning in bathrooms.
How long does a bespoke mirror take?
Plain mirrors cut to size are often ready soon after measuring, while bevelled, tinted, safety-backed or shaped mirrors take longer to process. Fitting is usually completed in a single visit, though full gym or studio walls can take longer. Your written quote sets out the expected timescale, and we confirm the date when the mirror is ready.
What affects the cost of a bespoke mirror?
The main cost drivers are the size and thickness of the mirror, the number of panels, the edge finish, any tint or low-iron glass, safety backing, cut-outs and the fixing method. Very large single sheets, access through narrow stairs and full mirror walls also affect the price. See the guide prices for typical ranges.
Can a mirror be cut around sockets and light switches?
Yes. We mark socket and switch positions on the template, cut the openings in the mirror, then remove and refit the faceplates so the mirror sits neatly behind them with the power isolated. If sockets need moving or adding, a qualified electrician should do that before we template so the cut-outs line up.
Do you cover Brighton & Hove for bespoke mirrors?
Yes. We can quote for bespoke mirrors across Brighton & Hove and the surrounding East Sussex area, including postcode districts BN1, BN3 and BN2, and nearby Burgess Hill, Worthing and Seaford. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
More glazing in Brighton & Hove
Get a written quote in Brighton & Hove
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.