Brighton & Hove · East Sussex
Property Glazing in Brighton & Hove
Do you manage rented homes in Brighton & Hove? We cover reactive glass repairs, boarding and safety glass upgrades with a quote for each job.
- BN1
- BN3
- BN2
- Guide from £165
Managing agent glazing services for homes and businesses in Brighton & Hove
Glass replaced in doors, beside doors and at low level should be safety glass in critical locations. In England, Approved Document K sets out these locations. Recording that safety glass was fitted, and keeping the photo of its marking, helps show the property was kept safe.
The cost of property glazing work depends on the job type, glass specification, size and number of panes, access, whether boarding is needed first, and whether visits are reactive or planned. Grouping planned work across several properties usually reduces travel and set-up time per job.
Tenant access is often the biggest cause of delay. With your permission, we contact tenants directly to arrange a convenient time, confirm the visit in writing and report back if access is refused, so you have a clear record of every attempt to complete the job.
When a property needs to be made safe after a break-in or damage, the first visit removes loose glass and boards or temporarily glazes the opening. The permanent glass is measured, quoted and fitted on a second visit, and both stages are reported against the same job.
What you get
- One point of contact for all glazing jobs
- Written quote per job with your reference
- Invoice matching the approved quote
- Make-safe boarding and permanent glass where needed
Working in Brighton & Hove
- Postcodes covered
- BN1, BN3, BN2 and the surrounding area, including Burgess Hill, Worthing and Seaford
- Coast
- Brighton & Hove is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Coastal portfolios see more salt corrosion on window hardware and more strain on seals from wind-driven rain. Planned checks on hinges, locks and sealed units help spot problems early, especially in seafront flats and holiday lets.
- Daylight and sun
- In Brighton & Hove the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 63° and 16.3 hours in midsummer. South and west-facing flats can overheat and suffer glare, which tenants often report. Solar control glass or film is an option on replacement, and checking for condensation on north-facing windows helps spot ventilation issues in colder months.
- Access and setting
- Urban portfolios often include flats above shops, HMOs and blocks with communal entrances. Access, parking, keys and tenant contact need planning, and ground-floor glass facing the street benefits from laminated glass and secure locks.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Brighton & Hove
| Typical job | Guide price inc VAT |
|---|---|
| Replace a standard sealed unit | £165 – £205 |
| Toughened door unit | £345 – £435 |
| Board up, then glaze (one window) | £315 – £405 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Options to choose between
Planned glazing survey
A property-by-property check of glass, safety marking, seals, hinges and locks, giving a schedule of work to budget and prioritise.
Void property works
Glass, locks, cylinders and window hardware checked and repaired between tenancies, so the property is ready to let.
Communal area glazing
Entrance doors, screens and stairwell windows in blocks and HMOs, including laminated glass and door hardware.
Property Glazing in Brighton & Hove: questions
What reports and photos do we get after each job?
You receive before and after photos, the glass specification fitted, a note of any safety glass marking, and any other defects the glazier noticed, such as failed hinges or misted units nearby. The invoice matches the approved quote and carries your reference, making it easy to check and file.
Do replacement panes in rented homes need to be safety glass?
They do if they are in critical locations. In England, Approved Document K covers glass in doors and within 300mm of a door edge, up to 1500mm above the floor, and other glass within 800mm of the floor. Upgrading old unmarked glass in these places reduces risk, and the rules differ in detail between UK nations.
How much does glazing work for landlords cost?
The cost depends on the type of job, glass specification, size and number of panes, access, any boarding needed first, and whether the work is reactive or planned. Grouping planned jobs across properties usually reduces cost per job. See the guide prices for typical work, and every job has its own written quote.
Can you carry out a planned glazing survey across our portfolio?
Yes. A glazier visits each property and records the condition of glass and windows, including unmarked glass in critical locations, misted units, cracks, failed hardware and missing restrictors. You receive a schedule with photos and recommended work, so you can prioritise safety items and budget for the rest.
Do you cover Brighton & Hove for property glazing?
Yes. We can quote for property glazing across Brighton & Hove and the surrounding East Sussex area, including postcode districts BN1, BN3 and BN2, and nearby Burgess Hill, Worthing and Seaford. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
More glazing in Brighton & Hove
Get a written quote in Brighton & Hove
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.