Gwent · Wales
Bespoke Mirrors in Gwent
An awkward alcove or sloping ceiling in Gwent does not have to rule out a mirror, because each one we fit is templated and cut to the real shape of the space.
- Guide from £205
- 17 towns covered
- Postcode areas CF, NP
About wardrobe mirror doors in Gwent
To protect the edges, spray glass cleaner onto a soft cloth rather than directly onto the mirror, so liquid does not run down and soak into the bottom edge. Avoid harsh or abrasive cleaners, and dry the edges after cleaning in bathrooms.
Mirrors must be bonded with an adhesive made to be compatible with mirror backing. Some general-purpose adhesives and acidic sealants can attack the protective coatings and the silver, causing dark patches that spread from behind. We only use mirror-compatible products.
A safety-backed mirror has a film bonded across its back that holds the pieces together if the glass breaks, so fragments stay on the backing instead of falling or scattering. Some backing films are classified for impact under BS EN 12600, and the film is applied before fitting.
Safety backing is a sensible choice wherever someone could fall or knock against a mirror, such as sliding wardrobe doors, full-height mirrors, children's rooms, gyms and dance studios. We recommend it at survey wherever the position or use of the room suggests it.
Towns we cover for bespoke mirrors in Gwent
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Gwent
In Wales, Approved Document N covers safety glazing: safety glass is needed in and around doors and in low-level glazing where people could walk into it.
Gwent has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Mirrors are fitted indoors, but salty, humid coastal air can still reach the silver backing through exposed edges, particularly in bathrooms and near entrances. Protected edges, a compatible adhesive and good ventilation all help prevent black edge corrosion.
Large mirrors for flats, salons and gyms often have to travel through narrow stairwells and small lifts, so walls may be covered in several panels with planned joints. Loading limits and building working hours can affect fitting times.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Polished mirror, 1200 × 900 mm | £205 – £265 |
| Safety-backed mirror, 1800 × 1000 mm | £365 – £465 |
| Gym mirror wall, 4000 × 2000 mm | £995 – £1,295 |
Choosing your bespoke mirrors
Bevelled edge
An angled border ground and polished around the edge that catches the light and frames the mirror without needing a separate frame.
Heated demister pad
A thin heating pad bonded behind a bathroom mirror to keep an area clear of steam, wired in by a qualified electrician.
Clear silver mirror
Standard silver-coated float glass mirror, cut to size, suited to most rooms, wardrobes and wall mirrors where a true, neutral reflection is wanted.
Antique-effect mirror
Mirror with a deliberately aged, mottled finish, giving a vintage look for feature walls, alcoves and period-style rooms.
Bespoke Mirrors in Gwent: questions
How is a large mirror fixed to the wall?
Large mirrors are usually bonded with an adhesive made for mirror backing and supported along the bottom edge by a slim channel or clips. The support carries the weight while the adhesive cures and adds security afterwards. Smaller mirrors can be screw-fixed through drilled holes with decorative caps, which makes them easier to remove later.
Why do mirrors go black around the edges?
Black edges are corrosion of the silver layer behind the glass, usually caused by moisture or cleaning fluid getting into the edges, or by an adhesive that reacts with the backing. Bathrooms are especially at risk because of steam. The damage cannot be reversed, so the mirror needs replacing, ideally with better edge protection and a compatible adhesive.
Can a large mirror be fixed to plasterboard?
Often, yes, but it depends on the board, its fixings and the surface finish. Adhesive grips the paint or plaster layer, so flaky paint or weak skim can let go under the weight. We check the wall at survey and may add a base channel, mechanical fixings into studs, or a backing board to spread the load.
Can I have a bespoke mirror in a bathroom?
Yes, provided the room is well ventilated and the mirror is protected from standing water. We use mirror that meets the relevant standard for internal use, bond it with a compatible adhesive and keep edges away from splashes where possible. A heated demister pad can keep part of the mirror clear, wired in by a qualified electrician.
Which parts of Gwent do you cover for bespoke mirrors?
We cover the whole of Gwent, including Newport (Gwent), Cwmbran, Pontypool, Ebbw Vale and Caerphilly, and postcode areas CF, NP. Building rules for bespoke mirrors here follow the regulations for Wales. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Gwent
- Replacement Glass in Gwent
- Misted Glass Repair in Gwent
- Emergency Glazing in Gwent
- Safety Glass in Gwent
- Window Repairs in Gwent
- Window Film in Gwent
- uPVC Windows in Gwent
- Aluminium Windows in Gwent
- Sash Windows in Gwent
- Composite Doors in Gwent
- Bifold Doors in Gwent
- Sliding Doors in Gwent
- Secondary Glazing in Gwent
- Roof Lanterns in Gwent
- Glass Balustrades in Gwent
- Frameless Glass in Gwent
- Shower Screens in Gwent
- Glass Splashbacks in Gwent
- Glass Roofs in Gwent
- Shopfront Glazing in Gwent
- Curtain Walling in Gwent
- Glass Partitions in Gwent
- Property Glazing in Gwent
Get a written quote in Gwent
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.