Call 0800 088 6248

Gwent · Wales

Glass Splashbacks in Gwent

A glass splashback in Gwent starts with templating after the worktops are fitted, then a written quote that fixes the price for the glass, colour and finish shown.

  • Guide from £225
  • 17 towns covered
  • Postcode areas CF, NP

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

About glass splashback behind hob in Gwent

Splashbacks are templated once the worktops, units and hob are fitted, not from kitchen plans. Worktop heights, wall angles and socket positions often move during installation, and the glass is made to the finished dimensions so edges line up and gaps stay even.

Hob makers set minimum clearances between the hob and nearby wall surfaces, and gas hobs in particular can have specific requirements. We check your hob's installation instructions before ordering so the glass, its cut-outs and any joints sit where the manufacturer allows.

The price depends on the total glass area, the number of panels and joints, the number of cut-outs, the colour and glass type, and access to the wall. Low-iron glass, metallic or printed finishes and complex shapes add cost. See the guide prices for typical ranges.

Colours look different on screens, in daylight and under kitchen lighting, so choose from a physical glass sample rather than a website or paint chart. We can match many paint and RAL colours, and a sample panel viewed in your own kitchen avoids surprises.

Pale green glass splashback behind a hob in a white kitchen

Towns we cover for glass splashbacks in Gwent

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Gwent

Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.

Gwent has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.

Kitchens in flats and terraces often have narrow access and tight stairs, so long splashbacks may be split into shorter panels with planned joints. Parking for the fitting team and building rules on working hours can also affect scheduling.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Hob splashback, 900 × 750 mm£225 – £285
Run behind worktop, 2400 × 600 mm£395 – £515
Low-iron, 900 × 750 mm£235 – £295

Choosing your glass splashbacks

Low-iron glass

Glass with less iron, removing the green tint of standard glass so whites, creams and pale colours look true to the sample.

Metallic or sparkle finish

Back-painted glass with metallic or fine sparkle effects, adding depth and reflection without the upkeep of polished metal.

Back-painted colour

Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.

Clear glass panel

Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.

Glass Splashbacks in Gwent: questions

When should my glass splashback be measured?

Your splashback should be templated after the worktops, units and hob are installed and any electrical work is finished. The glass is made to the exact finished dimensions, including socket positions, so measuring from plans or before worktops go in often leads to panels that do not fit and have to be remade.

Can a glass splashback go behind a hob?

Yes, provided it is toughened glass and the hob maker's clearances are followed. Toughened glass copes with the heat from a hob far better than ordinary glass, and it is what we fit behind cookers. Some gas hobs need a minimum gap to the wall, so we check your hob's instructions before the glass is ordered.

How do I clean a glass splashback?

Wipe it with a soft cloth and warm soapy water, or a non-abrasive glass cleaner, then buff dry for a streak-free finish. Grease behind the hob comes off easily because there are no grout lines. Avoid scourers, abrasive creams and blades, which can scratch the glass, and do not use cleaners that could seep behind the edges.

What affects the cost of a glass splashback?

The main cost drivers are the total glass area, the number of panels and joints, the number of socket and switch cut-outs, the colour and glass type, and how easy the wall is to reach. Low-iron glass, metallic or printed finishes and shaped panels add cost. See the guide prices for typical ranges.

Which parts of Gwent do you cover for glass splashbacks?

We cover the whole of Gwent, including Newport (Gwent), Cwmbran, Pontypool, Ebbw Vale and Caerphilly, and postcode areas CF, NP. Building rules for glass splashbacks here follow the regulations for Wales. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Gwent

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote