Kirkby-in-Ashfield · Nottinghamshire
Bespoke Mirrors in Kirkby-in-Ashfield
We cover Kirkby-in-Ashfield and Nottinghamshire for made-to-measure mirrors, from single bathroom mirrors to full gym walls, with every job surveyed and quoted in writing first.
- NG17
- NG18
- Guide from £205
Kirkby-in-Ashfield: wardrobe mirror doors
Most mirrors for internal use are made from silver-coated float glass covered by BS EN 1036-1, which sets definitions, quality requirements and test methods, including resistance to damp and corrosion. Mirror for bathrooms or other humid areas should come from a supplier whose product meets that standard.
Mirrors must be bonded with an adhesive made to be compatible with mirror backing. Some general-purpose adhesives and acidic sealants can attack the protective coatings and the silver, causing dark patches that spread from behind. We only use mirror-compatible products.
Black edges, often called edge creep, are corrosion of the silver layer, usually started by moisture or cleaning fluid getting into the edges, or by an unsuitable adhesive. Once the silver has corroded it cannot be restored, so the mirror has to be replaced.
To protect the edges, spray glass cleaner onto a soft cloth rather than directly onto the mirror, so liquid does not run down and soak into the bottom edge. Avoid harsh or abrasive cleaners, and dry the edges after cleaning in bathrooms.
What a typical job includes
- Safety backing film where the position calls for it
- Cut-outs and drilled holes for sockets, switches or fixings
- Final clean and advice on protecting the edges
- Mirror cut to size with your chosen edge finish
Working in Kirkby-in-Ashfield
- Postcodes covered
- NG17, NG18 and the surrounding area, including Sutton-in-Ashfield, Mansfield and Hucknall
- Coast
- Kirkby-in-Ashfield is well inland, around 76 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Kirkby-in-Ashfield the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.3 hours of daylight, rising to about 60° and 16.7 hours in midsummer. A mirror opposite or beside a window reflects daylight deeper into a room, which helps dark north-facing spaces through winter. Low direct sun on a large mirror can cause glare, so its position and any tint are worth considering.
- Access and setting
- Older rural homes often have uneven walls of stone or lime plaster, which can distort a bonded mirror unless the wall is levelled or a backing board is used. Damp solid walls also need checking before a mirror is fixed to them.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Kirkby-in-Ashfield
| Typical job | Guide price inc VAT |
|---|---|
| Polished mirror, 1200 × 900 mm | £205 – £265 |
| Safety-backed mirror, 1800 × 1000 mm | £365 – £465 |
| Gym mirror wall, 4000 × 2000 mm | £995 – £1,295 |
Options to choose between
Heated demister pad
A thin heating pad bonded behind a bathroom mirror to keep an area clear of steam, wired in by a qualified electrician.
Bevelled edge
An angled border ground and polished around the edge that catches the light and frames the mirror without needing a separate frame.
Tinted mirror
Grey or bronze tinted mirror that softens the reflection and adds warmth or depth, often used as a feature wall or in hospitality spaces.
Bespoke Mirrors in Kirkby-in-Ashfield: questions
How long does a bespoke mirror take?
Plain mirrors cut to size are often ready soon after measuring, while bevelled, tinted, safety-backed or shaped mirrors take longer to process. Fitting is usually completed in a single visit, though full gym or studio walls can take longer. Your written quote sets out the expected timescale, and we confirm the date when the mirror is ready.
Can I have a bespoke mirror in a bathroom?
Yes, provided the room is well ventilated and the mirror is protected from standing water. We use mirror that meets the relevant standard for internal use, bond it with a compatible adhesive and keep edges away from splashes where possible. A heated demister pad can keep part of the mirror clear, wired in by a qualified electrician.
Why do mirrors go black around the edges?
Black edges are corrosion of the silver layer behind the glass, usually caused by moisture or cleaning fluid getting into the edges, or by an adhesive that reacts with the backing. Bathrooms are especially at risk because of steam. The damage cannot be reversed, so the mirror needs replacing, ideally with better edge protection and a compatible adhesive.
Can a mirror be cut around sockets and light switches?
Yes. We mark socket and switch positions on the template, cut the openings in the mirror, then remove and refit the faceplates so the mirror sits neatly behind them with the power isolated. If sockets need moving or adding, a qualified electrician should do that before we template so the cut-outs line up.
Do you cover Kirkby-in-Ashfield for bespoke mirrors?
Yes. We can quote for bespoke mirrors across Kirkby-in-Ashfield and the surrounding Nottinghamshire area, including postcode districts NG17 and NG18, and nearby Sutton-in-Ashfield, Mansfield and Hucknall. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
More glazing in Kirkby-in-Ashfield
Get a written quote in Kirkby-in-Ashfield
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.