Call 0800 088 6248

Tyne and Wear · England

Bespoke Mirrors in Tyne and Wear

Mirrors with black edges in Tyne and Wear cannot be restored, but we can measure and replace them with new mirror bonded using a compatible adhesive to protect the silver.

  • Guide from £205
  • 15 towns covered
  • Postcode areas DH, NE, SR

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

About mirror cut to size in Tyne and Wear

Safety backing is a sensible choice wherever someone could fall or knock against a mirror, such as sliding wardrobe doors, full-height mirrors, children's rooms, gyms and dance studios. We recommend it at survey wherever the position or use of the room suggests it.

Edge finish affects both look and safety. Flat polished edges suit frameless mirrors and mirror walls, bevelled edges add an angled border that catches the light, and a simple arrised edge takes the sharpness off edges that will be hidden by a frame or channel.

Black edges, often called edge creep, are corrosion of the silver layer, usually started by moisture or cleaning fluid getting into the edges, or by an unsuitable adhesive. Once the silver has corroded it cannot be restored, so the mirror has to be replaced.

Mirrors must be bonded with an adhesive made to be compatible with mirror backing. Some general-purpose adhesives and acidic sealants can attack the protective coatings and the silver, causing dark patches that spread from behind. We only use mirror-compatible products.

Floor-to-ceiling mirror wall in a home gym

Towns we cover for bespoke mirrors in Tyne and Wear

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Tyne and Wear

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Tyne and Wear has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Mirrors are fitted indoors, but salty, humid coastal air can still reach the silver backing through exposed edges, particularly in bathrooms and near entrances. Protected edges, a compatible adhesive and good ventilation all help prevent black edge corrosion.

Large mirrors for flats, salons and gyms often have to travel through narrow stairwells and small lifts, so walls may be covered in several panels with planned joints. Loading limits and building working hours can affect fitting times.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Polished mirror, 1200 × 900 mm£205 – £265
Safety-backed mirror, 1800 × 1000 mm£365 – £465
Gym mirror wall, 4000 × 2000 mm£995 – £1,295

Choosing your bespoke mirrors

Heated demister pad

A thin heating pad bonded behind a bathroom mirror to keep an area clear of steam, wired in by a qualified electrician.

Safety-backed mirror

Mirror with a bonded backing film that holds fragments together if it breaks, recommended for doors, full-height mirrors, gyms and children's rooms.

Clear silver mirror

Standard silver-coated float glass mirror, cut to size, suited to most rooms, wardrobes and wall mirrors where a true, neutral reflection is wanted.

Antique-effect mirror

Mirror with a deliberately aged, mottled finish, giving a vintage look for feature walls, alcoves and period-style rooms.

Bespoke Mirrors in Tyne and Wear: questions

Why do mirrors go black around the edges?

Black edges are corrosion of the silver layer behind the glass, usually caused by moisture or cleaning fluid getting into the edges, or by an adhesive that reacts with the backing. Bathrooms are especially at risk because of steam. The damage cannot be reversed, so the mirror needs replacing, ideally with better edge protection and a compatible adhesive.

Can a large mirror be fixed to plasterboard?

Often, yes, but it depends on the board, its fixings and the surface finish. Adhesive grips the paint or plaster layer, so flaky paint or weak skim can let go under the weight. We check the wall at survey and may add a base channel, mechanical fixings into studs, or a backing board to spread the load.

How is a large mirror fixed to the wall?

Large mirrors are usually bonded with an adhesive made for mirror backing and supported along the bottom edge by a slim channel or clips. The support carries the weight while the adhesive cures and adds security afterwards. Smaller mirrors can be screw-fixed through drilled holes with decorative caps, which makes them easier to remove later.

Can a mirror be cut around sockets and light switches?

Yes. We mark socket and switch positions on the template, cut the openings in the mirror, then remove and refit the faceplates so the mirror sits neatly behind them with the power isolated. If sockets need moving or adding, a qualified electrician should do that before we template so the cut-outs line up.

Which parts of Tyne and Wear do you cover for bespoke mirrors?

We cover the whole of Tyne and Wear, including Newcastle upon Tyne, Sunderland, South Shields, Gateshead and Washington, and postcode areas DH, NE, SR. Building rules for bespoke mirrors here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Tyne and Wear

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote