Tyne and Wear · England
Glass Splashbacks in Tyne and Wear
Looking for a glass splashback in Tyne and Wear? Our glaziers can template your finished kitchen and quote for toughened, back-painted glass made with every socket cut-out in place.
- Guide from £225
- 15 towns covered
- Postcode areas DH, NE, SR
Glass splashback behind hob in Tyne and Wear: what to know
Toughened glass cannot be cut or drilled after toughening, so every socket, switch, extractor and window-reveal cut-out is made beforehand. Sockets cannot be moved after the glass is ordered without remaking the panel, so electrical positions need to be final at templating.
The wall behind a splashback must be flat, sound and dry so the adhesive bonds evenly. Old tiles are usually removed and the wall made good, because uneven surfaces show through the glass and can create stress points behind the panel.
Splashbacks are templated once the worktops, units and hob are fitted, not from kitchen plans. Worktop heights, wall angles and socket positions often move during installation, and the glass is made to the finished dimensions so edges line up and gaps stay even.
After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on colour and finish. Fitting a typical kitchen takes part of a day, and the kitchen can normally be used again straight afterwards, though the silicone needs time to cure fully.
Towns we cover for glass splashbacks in Tyne and Wear
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Tyne and Wear
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
Tyne and Wear has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.
Kitchens in flats and terraces often have narrow access and tight stairs, so long splashbacks may be split into shorter panels with planned joints. Parking for the fitting team and building rules on working hours can also affect scheduling.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Low-iron glass
Glass with less iron, removing the green tint of standard glass so whites, creams and pale colours look true to the sample.
Back-painted colour
Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.
Printed design
A digitally printed image or pattern on the back of the glass, sealed behind it so the front stays smooth and wipeable.
Clear glass panel
Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.
Glass Splashbacks in Tyne and Wear: questions
Can I fit a glass splashback myself?
It is possible, but the risks are mostly in measuring and handling. A small error in templating or a socket position means the toughened panel has to be remade, because it cannot be trimmed. Large panels are heavy and awkward to place without damaging worktops, and the adhesive must suit the painted back. We measure, make and fit as one job.
Can a glass splashback be fitted over existing tiles?
It is usually better to remove the tiles and make the wall good first. Glass needs a flat, sound surface for the adhesive to bond evenly, and grout lines, uneven tiles or loose tiles can show through or create stress points. Removing tiles also stops the glass standing too far forward of the worktop and sockets.
Why does my white glass splashback look slightly green?
Standard glass contains iron, which gives it a green tint that shows through pale back-painted colours, particularly white and cream. Low-iron glass has much less iron, so the colour behind looks close to the painted sample. If you are choosing a light colour, it is worth specifying low-iron glass from the start.
Can you cut holes in a glass splashback for sockets?
Yes. Socket, switch and extractor cut-outs are made at the factory before the glass is toughened, because toughened glass cannot be cut afterwards. That means socket positions must be final when we template. If sockets need moving or adding, a qualified electrician should do that first, and we template around the new positions.
Which parts of Tyne and Wear do you cover for glass splashbacks?
We cover the whole of Tyne and Wear, including Newcastle upon Tyne, Sunderland, South Shields, Gateshead and Washington, and postcode areas DH, NE, SR. Building rules for glass splashbacks here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Tyne and Wear
- Replacement Glass in Tyne and Wear
- Misted Glass Repair in Tyne and Wear
- Emergency Glazing in Tyne and Wear
- Safety Glass in Tyne and Wear
- Window Repairs in Tyne and Wear
- Window Film in Tyne and Wear
- uPVC Windows in Tyne and Wear
- Aluminium Windows in Tyne and Wear
- Sash Windows in Tyne and Wear
- Composite Doors in Tyne and Wear
- Bifold Doors in Tyne and Wear
- Sliding Doors in Tyne and Wear
- Secondary Glazing in Tyne and Wear
- Roof Lanterns in Tyne and Wear
- Glass Balustrades in Tyne and Wear
- Frameless Glass in Tyne and Wear
- Shower Screens in Tyne and Wear
- Bespoke Mirrors in Tyne and Wear
- Glass Roofs in Tyne and Wear
- Shopfront Glazing in Tyne and Wear
- Curtain Walling in Tyne and Wear
- Glass Partitions in Tyne and Wear
- Property Glazing in Tyne and Wear
All glazing in Tyne and Wear · Glass Splashbacks across the UK
Get a written quote in Tyne and Wear
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.