Mold · Clwyd
Composite Doors in Mold
If your back door in Mold is draughty, hard to lock or letting water in, we can survey it and quote for a made-to-measure composite replacement.
- CH7
- Guide from £1,295
Composite doors in Mold: what to know
A flat's entrance door that opens onto a shared stairwell or corridor is normally a fire door, so it should not be swapped for a standard composite door. Certified fire-rated composite doorsets are made for this purpose, and the freeholder or managing agent will usually need to agree the replacement.
Letterplates can be a security weak spot, because tools can be fed through to reach the inside handle or keys. A letterplate with an internal cowl or restrictor, or a door with no letterplate and a wall-mounted post box, reduces that risk. Keys should be kept away from the door.
Composite doors do not need painting. Wipe the skin and frame with warm soapy water, avoid solvents and abrasive pads, and keep the threshold drainage clear. A little light oil on the lock gearing and hinges once or twice a year keeps the door closing smoothly, and hinges can be adjusted if it drops.
A composite door slab usually combines a glass-reinforced plastic (GRP) outer skin, moulded with a woodgrain texture, over an insulated core. Some cores are high-density foam, others solid timber. Timber-cored slabs tend to feel heavier and more solid when closed, while foam cores are lighter and insulate well.
Included as standard
- Survey, measuring and threshold check
- Fitting, adjusting, sealing and finishing around the frame
- Multi-point lock with anti-snap cylinder
- Made-to-measure composite doorset in your chosen colour
Local details for Mold
- Postcodes covered
- CH7 and the surrounding area, including Buckley, Deeside and Hawarden
- Coast
- Mold sits roughly 10 km from the nearest coastline, close enough that exposure on open or high ground is worth considering. Near the sea, salt air corrodes plated door furniture and lock parts more quickly, so marine-grade or stainless hardware is worth considering. Exposed doors also face wind-driven rain, so a well-sealed frame, weatherbar and threshold drainage matter more than usual.
- Daylight and sun
- In Mold the midwinter sun reaches about 13° above the horizon at noon, with roughly 7.3 hours of daylight, rising to about 60° and 16.7 hours in midsummer. Dark-coloured doors in direct sun get much hotter than pale ones, so follow the manufacturer's guidance on colour for south and west-facing entrances. Glazed panels and side lights bring daylight into dark hallways, especially on north-facing elevations.
- Access and setting
- Rural doors often face open fields, driving rain and sometimes mud and animals, so robust weather seals and threshold drainage matter. Older cottages may have low or irregular openings, so doors are measured carefully and frames sized to suit.
- Rules in Wales
- In Wales, Approved Document N covers safety glazing: safety glass is needed in and around doors and in low-level glazing where people could walk into it.
Guide prices in Mold
| Typical job | Guide price inc VAT |
|---|---|
| Composite front door, supplied and fitted | £1,295 – £1,795 |
| Door with one side panel | £1,695 – £2,295 |
| Door, side panel and top light | £1,895 – £2,595 |
Get a guide price for your size
Listed buildings in Wales need listed building consent for most changes to historic windows; Cadw publishes guidance on looking after traditional windows.
Choosing your composite doors
Solid timber core
A heavier slab with a timber core under the composite skin, giving a solid feel and sound when the door closes.
Insulated foam core
A lighter slab with a high-density foam core, offering good thermal performance and a wide range of styles.
Colours and dual colour
Woodgrain-textured skins in many colours, often with a different colour inside so the door suits both the street and the hallway.
Composite Doors in Mold: questions
What guarantee comes with a composite door?
Manufacturer guarantees apply to the door slab, frame, glass and locking hardware, and the terms are confirmed in writing. Guarantee terms for the installation are set out in writing with your quote, so you know what is covered before you go ahead. Keep the paperwork with your building regulations certificate for when you sell the property.
Will a composite door fade or need painting?
Composite doors do not need painting, and the coloured skins are designed to resist fading, although any surface colour can change slightly over many years in strong sun. Clean the door with warm soapy water and a soft cloth, and avoid solvents or abrasive pads. Manufacturer guarantees apply to the finish, and the terms are confirmed in writing.
What glass can I have in a composite door?
Composite door glass comes in sealed cassettes with clear, obscure, bevelled, leaded-effect or decorative designs. Any glass within 1500mm of the floor in a door should be safety glass, and laminated glass adds security because it stays together when struck. Obscure designs give privacy in hallways while still letting daylight in.
Are composite doors more secure than uPVC doors?
A well-specified composite door is usually stiffer and harder to force than an older uPVC panel door, but security depends mostly on the lock, cylinder, hinges and glass. Look for a multi-point lock, an anti-snap cylinder such as TS 007 3-star or SS312 Diamond, laminated glass and a door tested to PAS 24.
Do you cover Mold for composite doors?
Yes. We can quote for composite doors across Mold and the surrounding Clwyd area, including postcode districts CH7, and nearby Buckley, Deeside and Hawarden. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Mold
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.