Burton upon Trent · Staffordshire
Composite Doors in Burton upon Trent
Timber doors in Burton upon Trent that swell, stick or need repainting can be replaced with low-maintenance composite doors that look like painted timber.
- DE14
- DE15
- Guide from £1,295
Composite back doors for homes and businesses in Burton upon Trent
A composite door slab usually combines a glass-reinforced plastic (GRP) outer skin, moulded with a woodgrain texture, over an insulated core. Some cores are high-density foam, others solid timber. Timber-cored slabs tend to feel heavier and more solid when closed, while foam cores are lighter and insulate well.
A flat's entrance door that opens onto a shared stairwell or corridor is normally a fire door, so it should not be swapped for a standard composite door. Certified fire-rated composite doorsets are made for this purpose, and the freeholder or managing agent will usually need to agree the replacement.
Letterplates can be a security weak spot, because tools can be fed through to reach the inside handle or keys. A letterplate with an internal cowl or restrictor, or a door with no letterplate and a wall-mounted post box, reduces that risk. Keys should be kept away from the door.
Composite doors do not need painting. Wipe the skin and frame with warm soapy water, avoid solvents and abrasive pads, and keep the threshold drainage clear. A little light oil on the lock gearing and hinges once or twice a year keeps the door closing smoothly, and hinges can be adjusted if it drops.
What you get
- Removal and disposal of the old door and frame
- Survey, measuring and threshold check
- Made-to-measure composite doorset in your chosen colour
- Fitting, adjusting, sealing and finishing around the frame
About Burton upon Trent for this job
- Postcodes covered
- DE14, DE15 and the surrounding area, including Swadlincote, Derby and Lichfield
- Coast
- Burton upon Trent is well inland, around 95 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Burton upon Trent the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Dark-coloured doors in direct sun get much hotter than pale ones, so follow the manufacturer's guidance on colour for south and west-facing entrances. Glazed panels and side lights bring daylight into dark hallways, especially on north-facing elevations.
- Access and setting
- Street-facing front doors in towns and cities face more passers-by, so anti-snap cylinders, laminated glass and letterplate guards are worth specifying. Conservation areas may control front door styles and colours, and flat entrance doors onto shared corridors normally need fire-rated doorsets.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Burton upon Trent
| Typical job | Guide price inc VAT |
|---|---|
| Composite front door, supplied and fitted | £1,295 – £1,795 |
| Door with one side panel | £1,695 – £2,295 |
| Door, side panel and top light | £1,895 – £2,595 |
Get a guide price for your size
If the glass sits in a fire-resisting door or screen, such as a flat entrance door or a commercial corridor screen, it must be replaced with fire-rated glazing tested as part of that system. Ordinary toughened glass is not a substitute.
Options to choose between
Insulated foam core
A lighter slab with a high-density foam core, offering good thermal performance and a wide range of styles.
Low threshold
A low-profile aluminium threshold for step-free or near step-free access, used where drainage and shelter allow.
Side panels and toplights
Glazed or solid panels beside or above the door to bring light into the hallway and fill wider openings.
Composite Doors in Burton upon Trent: questions
What glass can I have in a composite door?
Composite door glass comes in sealed cassettes with clear, obscure, bevelled, leaded-effect or decorative designs. Any glass within 1500mm of the floor in a door should be safety glass, and laminated glass adds security because it stays together when struck. Obscure designs give privacy in hallways while still letting daylight in.
Do I need planning permission to replace my front door?
In England, replacing a house's front door with one of similar appearance usually does not need planning permission. Listed buildings need listed building consent for significant works, and conservation areas or Article 4 directions can restrict changes to front doors, colours and materials. Flats may need permission, so check with your council if your home falls into any of these.
Will a composite door fade or need painting?
Composite doors do not need painting, and the coloured skins are designed to resist fading, although any surface colour can change slightly over many years in strong sun. Clean the door with warm soapy water and a soft cloth, and avoid solvents or abrasive pads. Manufacturer guarantees apply to the finish, and the terms are confirmed in writing.
How long does it take to fit a composite door?
Fitting a composite front or back door usually takes a day on site, including removing the old door and frame, fitting and adjusting the new doorset and sealing around it. Doors are made to order first, and the manufacturing lead time depends on the style and colour; it is confirmed in writing when you accept the quote.
Do you cover Burton upon Trent for composite doors?
Yes. We can quote for composite doors across Burton upon Trent and the surrounding Staffordshire area, including postcode districts DE14 and DE15, and nearby Swadlincote, Derby and Lichfield. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
More glazing in Burton upon Trent
Get a written quote in Burton upon Trent
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.