Call 0800 088 6248

Burton upon Trent · Staffordshire

Shower Screens in Burton upon Trent

Shower screens in Burton upon Trent start with a survey once the tiling is finished, followed by a written quote that fixes the price for the glass, hardware and finish shown.

  • DE14
  • DE15
  • Guide from £395

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Wet room glass panel in Burton upon Trent

Glass-to-wall and glass-to-glass hinges suit most doors, and pivot hinges let a door swing from a point set in from the edge. Doors normally open outwards, so check the swing clears the toilet, basin and bathroom door before choosing a layout.

A walk-in panel fixed only at the wall and floor needs a bracing bar running to the wall or ceiling to stop it flexing. The bar's position is planned around tiles, windows and shower valves, and a floor channel can reduce or remove the need for a brace.

The glass screen stops spray, but it is not the waterproofing. The tanking behind the tiles, the tray or floor fall and the drain do that job. Clear silicone along the glass edges then seals the joints, and it needs time to cure before the shower is used.

Limescale builds up more quickly in hard-water areas. Wiping the glass with a squeegee after each shower, cleaning weekly with a mild non-abrasive cleaner and avoiding scouring pads keeps it clear. Harsh descalers can also dull metal hinges and attack silicone seals.

What a typical job includes

  • Hinges, clamps, channels or bracing bars in your finish
  • Clear silicone sealing to tray, floor and walls
  • Easy-clean coating where specified, plus care advice
  • Made-to-measure toughened safety glass with factory-made holes
Frameless walk-in shower screen with black fittings in a tiled bathroom

About Burton upon Trent for this job

Postcodes covered
DE14, DE15 and the surrounding area, including Swadlincote, Derby and Lichfield
Coast
Burton upon Trent is well inland, around 95 km from the nearest coast, so salt exposure is not usually a factor.
Daylight and sun
In Burton upon Trent the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
Access and setting
Flats often mean carrying large panels up stairs or in small lifts, so panel sizes may need splitting. Building rules on working hours and noise, and bathrooms above other homes, make careful sealing and protection of finishes especially important.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Burton upon Trent

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Walk-in shower panel£395 – £695
Hinged door with in-line panel£795 – £1,295
Corner or full enclosure£995 – £1,595

Get a guide price for your size

What you can choose

Hinged door enclosure

A glass door on wall or glass hinges with fixed side panels, suiting alcoves, corners and trays where a fully enclosed shower is wanted.

Satin or tinted glass

Satin bands, full satin panels or grey and bronze tints that add privacy or style while still letting light into the shower.

Over-bath screen

A fixed or hinged toughened glass panel on the bath edge, made to measure for baths that sit against sloping ceilings or uneven walls.

Shower Screens in Burton upon Trent: questions

What thickness of glass should a shower screen be?

For frameless screens, 8mm toughened glass suits most doors and enclosures, and 10mm is commonly used for walk-in and wet room panels that stand with little support. Thinner glass is used in framed enclosures where the frame does some of the work. We recommend a thickness at survey based on the panel size and how it is fixed.

How long does it take to fit a shower screen?

Most shower screens are fitted in a single visit once the glass has been made, which usually takes a couple of weeks after measuring. The silicone then needs time to cure, so you should wait before using the shower, and we tell you how long on the day. Your quote confirms the expected timescale.

Is a chipped shower screen safe to keep using?

A chip on the edge of toughened glass can weaken the whole panel, because the surface is under stress and damage at the edge can lead to sudden breakage. It is safer to stop using that door or panel and have it replaced. We can remake it from the original measurements or a fresh template.

Is an easy-clean coating on shower glass worth having?

An easy-clean coating makes water bead and run off, so limescale and soap marks build up more slowly and wiping takes less effort. It is most useful in hard-water areas. It does not replace cleaning, and its life depends on using non-abrasive products, so we give you the care instructions with the screen.

Do you cover Burton upon Trent for shower screens?

Yes. We can quote for shower screens across Burton upon Trent and the surrounding Staffordshire area, including postcode districts DE14 and DE15, and nearby Swadlincote, Derby and Lichfield. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Burton upon Trent

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote