Tenby · Dyfed
Curtain Walling in Tenby
Misted, cracked or leaking facade units in Tenby can usually be replaced individually, and we can survey the system and access before quoting.
- SA70
- SA69
- Guide from £455 per m²
Commercial glazed screens for homes and businesses in Tenby
The look of the facade depends on how the glass is held. Capped systems clamp the glass with pressure plates hidden behind a visible cover cap, while structural silicone glazing bonds the glass to carrier frames so the outside reads as a smooth, almost frameless surface.
Curtain walling needs planned upkeep. Clean frames and glass regularly, keep drainage outlets clear, and inspect gaskets, seals and fixings for shrinkage, gaps or corrosion. Failed or misted sealed units can usually be replaced individually without removing the surrounding framing.
A stick system is built on site piece by piece. Aluminium mullions and transoms are fixed to the structure first, then the glass and infill panels go in, and finally the pressure plates and caps. It suits low-rise buildings and screens but needs access to both faces.
Wind load on a facade rises with height, exposure and building shape, and it decides the mullion size, bracket design and glass thickness. Calculations for the specific site are part of the design, so a system suited to a sheltered ground-floor screen may not suit an exposed upper storey.
What you get
- Supply and installation of framing, glass and panels
- Final inspection, clean and maintenance guidance
- Survey of openings, supporting structure and access
- System selection and glass specification for the building
Tenby at a glance
- Postcodes covered
- SA70, SA69 and the surrounding area, including Pembroke Dock, Milford Haven and Haverfordwest
- Coast
- Tenby is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Facades near the sea face salt-laden wind and driving rain, which attack frame finishes and stress seals. Suitable coating specifications, regular washing, gasket checks and higher design wind loads for exposed sites all matter for curtain walling there.
- Daylight and sun
- In Tenby the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Large glazed facades bring in plenty of daylight but also solar gain and glare, especially on south and west elevations. Solar control glass, shading and blinds are balanced against light transmission so interiors stay bright without overheating.
- Access and setting
- Commercial buildings on open rural or upland sites can face high wind exposure and driving rain, which affect frame sizes, glass thickness and sealing details. Longer delivery routes for large glass units also need planning in advance.
- Rules in Wales
- In Wales, Approved Document N covers safety glazing: safety glass is needed in and around doors and in low-level glazing where people could walk into it.
Guide prices in Tenby
| Typical job | Guide price inc VAT |
|---|---|
| Curtain walling, per m² (stick system) | £455 – £795 |
| Curtain walling, per m² (unitised) | £545 – £955 |
Get a guide price for your size
Wales sets its own energy standards in the Welsh Approved Document L. Replacement windows, doors and rooflights must meet the limiting values set there, which your quote will reference.
Specification choices
Opaque spandrel panels
Insulated or back-painted glass panels that hide floor slabs, ceiling voids and services while keeping the facade's appearance consistent.
Integrated opening vents
Top-hung or parallel-opening vents built into the curtain wall grid to provide natural ventilation without breaking the facade line.
Solar control glass
Coated glass that limits solar heat gain on sunny elevations while keeping good daylight, reducing overheating and glare inside.
Curtain Walling in Tenby: questions
What glass is used in curtain walling?
Curtain walling normally uses sealed double or triple glazed units, with toughened or laminated panes chosen for safety, security and wind load. Coatings control heat loss and solar gain, and heat-soaked toughened glass is often specified for upper levels. Where fire resistance is needed, a tested fire-resistant glazing system is used instead of standard glass.
How does curtain walling keep water out?
Curtain walling uses outer gaskets and seals to shed most rain, with drainage routes inside the framing that collect any water getting past them and lead it back outside. Inner seals then provide the air seal. Keeping drainage outlets clear and gaskets in good condition is essential, because blocked drains or shrunk seals can let water into the building.
Should I choose a stick or unitised curtain wall?
A stick system is assembled on site and generally suits low-rise buildings, entrances and smaller screens, with simpler logistics. A unitised system uses factory-made panels lifted into place, which reduces site joints and work at height but needs cranage and longer planning. The building's height, access and programme usually decide which is the right fit.
Does new curtain walling need building regulations approval?
New curtain walling is building work that has to meet requirements for structure, energy and fire, so it is normally checked by building control as part of the project. The approval route depends on the building and the nation, because England, Wales, Scotland and Northern Ireland have separate systems. Planning permission may also be needed for changes to appearance.
Do you cover Tenby for curtain walling?
Yes. We can quote for curtain walling across Tenby and the surrounding Dyfed area, including postcode districts SA70 and SA69, and nearby Pembroke Dock, Milford Haven and Haverfordwest. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Tenby
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.