Oxford · Oxfordshire
Curtain Walling in Oxford
Is water getting in around an older glazed facade in Oxford? We can inspect gaskets, seals and drainage paths and quote for the repairs or replacement needed.
- OX1
- OX2
- OX3
- OX4
- Guide from £455 per m²
Oxford: curtain walling
BS EN 13830 is the product standard for curtain walling. It treats the system as a kit, including its fixings, set from vertical up to 15 degrees off vertical. Sloping roof glazing and patent glazing fall outside it and are covered by other standards.
The price depends on the facade area, the system type, glass specification such as solar control or triple glazing, infill panels, opening vents, building height and access equipment, and design and testing requirements. Replacement units also depend on how the glass is retained. See the guide prices for typical ranges.
Building regulations require external walls to limit the spread of fire, so curtain walling design has to consider how its materials react to fire and how fire could pass between floors. The requirements depend on the building's height and use, and differ between the UK nations.
A stick system is built on site piece by piece. Aluminium mullions and transoms are fixed to the structure first, then the glass and infill panels go in, and finally the pressure plates and caps. It suits low-rise buildings and screens but needs access to both faces.
What's included
- Fabrication drawings and coordination with other trades
- Survey of openings, supporting structure and access
- Supply and installation of framing, glass and panels
- Final inspection, clean and maintenance guidance
About Oxford for this job
- Postcodes covered
- OX1, OX2, OX3, OX4 and the surrounding area, including Abingdon, Didcot and Witney
- Coast
- Oxford is well inland, around 79 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Oxford the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Large glazed facades bring in plenty of daylight but also solar gain and glare, especially on south and west elevations. Solar control glass, shading and blinds are balanced against light transmission so interiors stay bright without overheating.
- Access and setting
- City-centre facades often need crane or hoist bookings, pavement or road licences, out-of-hours deliveries and close coordination with other trades. Tight sites need careful sequencing, and unitised panels can reduce the amount of work at height.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Oxford
| Typical job | Guide price inc VAT |
|---|---|
| Curtain walling, per m² (stick system) | £455 – £795 |
| Curtain walling, per m² (unitised) | £545 – £955 |
Get a guide price for your size
Replacing windows and doors with similar ones is usually permitted development for houses in England. Flats, listed buildings and homes in conservation areas or covered by an Article 4 direction can need permission, so check with the council first.
Choosing your curtain walling
Solar control glass
Coated glass that limits solar heat gain on sunny elevations while keeping good daylight, reducing overheating and glare inside.
Structural silicone glazing
Glass bonded to carrier frames with structural sealant, giving a flush external face with minimal visible framing.
Integrated opening vents
Top-hung or parallel-opening vents built into the curtain wall grid to provide natural ventilation without breaking the facade line.
Curtain Walling in Oxford: questions
How should curtain walling be maintained?
Curtain walling should be cleaned regularly and inspected at planned intervals. Check that drainage outlets are clear, gaskets have not shrunk or slipped, sealant joints are intact and fixings show no corrosion. Address misted or cracked units early. A simple maintenance schedule kept with the building records helps facilities teams spot problems before they become leaks.
What affects the cost of curtain walling?
The main cost drivers are facade area, system type, glass specification, infill panels, opening vents, building height and access equipment such as scaffolding, hoists or cranes. Structural silicone glazing, unitised panels, fire-resisting sections and testing requirements add cost. See the guide prices for typical ranges, and your written quote fixes the price for the specification.
How long does a curtain walling project take?
Timescales depend on size and complexity. Design, approvals and fabrication of framing and glass usually take several weeks to a few months before installation starts. Installation then depends on the facade area, access and sequencing with other trades. Replacing individual units is much quicker once the glass is made. Your written quote sets out the expected programme.
What is the difference between curtain walling and windows?
Curtain walling is a continuous framed wall of glass and panels that spans across floors and hangs off the building structure, carrying its own weight and wind loads. Windows sit within individual openings in a masonry or framed wall. Curtain walling suits large glazed areas and multi-storey facades, while windows suit punched openings.
Do you cover Oxford for curtain walling?
Yes. We can quote for curtain walling across Oxford and the surrounding Oxfordshire area, including postcode districts OX1, OX2, OX3 and OX4, and nearby Abingdon, Didcot and Witney. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Oxford
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.