Call 0800 088 6248

Oxfordshire · England

Curtain Walling in Oxfordshire

Misted, cracked or leaking facade units in Oxfordshire can usually be replaced individually, and we can survey the system and access before quoting.

  • Guide from £455 per m²
  • 10 towns covered
  • Postcode areas OX, RG, SN

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

About aluminium curtain wall in Oxfordshire

A stick system is built on site piece by piece. Aluminium mullions and transoms are fixed to the structure first, then the glass and infill panels go in, and finally the pressure plates and caps. It suits low-rise buildings and screens but needs access to both faces.

Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panes in the factory, and it is often specified for toughened glass high on facades where a breakage is harder to deal with.

Wind load on a facade rises with height, exposure and building shape, and it decides the mullion size, bracket design and glass thickness. Calculations for the specific site are part of the design, so a system suited to a sheltered ground-floor screen may not suit an exposed upper storey.

Curtain walling needs planned upkeep. Clean frames and glass regularly, keep drainage outlets clear, and inspect gaskets, seals and fixings for shrinkage, gaps or corrosion. Failed or misted sealed units can usually be replaced individually without removing the surrounding framing.

Glass curtain wall on an office building against a blue sky

Towns we cover for curtain walling in Oxfordshire

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Oxfordshire

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.

Oxfordshire is inland, around 56 km from the nearest coast at its closest point, so salt exposure is rarely a factor.

City-centre facades often need crane or hoist bookings, pavement or road licences, out-of-hours deliveries and close coordination with other trades. Tight sites need careful sequencing, and unitised panels can reduce the amount of work at height.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Curtain walling, per m² (stick system)£455 – £795
Curtain walling, per m² (unitised)£545 – £955

Choosing your curtain walling

Integrated opening vents

Top-hung or parallel-opening vents built into the curtain wall grid to provide natural ventilation without breaking the facade line.

Solar control glass

Coated glass that limits solar heat gain on sunny elevations while keeping good daylight, reducing overheating and glare inside.

Capped system

Glass clamped by pressure plates behind a visible external cap, available in different profiles and colours to emphasise the grid.

Unitised curtain wall

Factory-assembled, pre-glazed storey-height panels lifted into place, reducing site joints and work at height on taller or tight sites.

Curtain Walling in Oxfordshire: questions

Should I choose a stick or unitised curtain wall?

A stick system is assembled on site and generally suits low-rise buildings, entrances and smaller screens, with simpler logistics. A unitised system uses factory-made panels lifted into place, which reduces site joints and work at height but needs cranage and longer planning. The building's height, access and programme usually decide which is the right fit.

Do glazed screens in offices and entrances need markings?

Large areas of clear glass that people could walk into need to be made visible. In England, the guidance for buildings other than dwellings puts manifestation at 850–1000mm and 1400–1600mm above the floor, and workplace rules across Great Britain require glass to be marked where needed for safety. Frosted bands or logos can meet this.

Does new curtain walling need building regulations approval?

New curtain walling is building work that has to meet requirements for structure, energy and fire, so it is normally checked by building control as part of the project. The approval route depends on the building and the nation, because England, Wales, Scotland and Northern Ireland have separate systems. Planning permission may also be needed for changes to appearance.

How long does a curtain walling project take?

Timescales depend on size and complexity. Design, approvals and fabrication of framing and glass usually take several weeks to a few months before installation starts. Installation then depends on the facade area, access and sequencing with other trades. Replacing individual units is much quicker once the glass is made. Your written quote sets out the expected programme.

Which parts of Oxfordshire do you cover for curtain walling?

We cover the whole of Oxfordshire, including Oxford, Banbury, Abingdon, Bicester and Didcot, and postcode areas OX, RG, SN. Building rules for curtain walling here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Oxfordshire

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote