Staffordshire · England

Curtain Walling in Staffordshire

Misted, cracked or leaking facade units in Staffordshire can usually be replaced individually, and we can survey the system and access before quoting.

Guide from £455 per m²
11 towns covered
Postcode areas B, DE, DY, ST, WS, WV

Aluminium curtain wall across Staffordshire

Where a glazed screen must resist fire, the glass only performs as part of a fire-resistant system tested with its frame, seals, beads and fixings. Ratings use letters such as E for integrity and EI for integrity and insulation, and components must not be swapped without test evidence.

Under the energy rules for new work in England, curtain walling performance is assessed for the whole system, including frames and opaque infill panels, not just the glass. Solar gain through the glass is also considered, so the glass choice balances heat loss, overheating and daylight.

Wind load on a facade rises with height, exposure and building shape, and it decides the mullion size, bracket design and glass thickness. Calculations for the specific site are part of the design, so a system suited to a sheltered ground-floor screen may not suit an exposed upper storey.

Building regulations require external walls to limit the spread of fire, so curtain walling design has to consider how its materials react to fire and how fire could pass between floors. The requirements depend on the building's height and use, and differ between the UK nations.

Glass curtain wall on an office building against a blue sky

Towns we cover for curtain walling in Staffordshire

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Staffordshire

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Replacing windows and doors with similar ones is usually permitted development for houses in England. Flats, listed buildings and homes in conservation areas or covered by an Article 4 direction can need permission, so check with the council first.

Staffordshire is inland, around 44 km from the nearest coast at its closest point, so salt exposure is rarely a factor.

City-centre facades often need crane or hoist bookings, pavement or road licences, out-of-hours deliveries and close coordination with other trades. Tight sites need careful sequencing, and unitised panels can reduce the amount of work at height.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical job	Guide price inc VAT
Curtain walling, per m² (stick system)	£455 – £795
Curtain walling, per m² (unitised)	£545 – £955

Choosing your curtain walling

Opaque spandrel panels

Insulated or back-painted glass panels that hide floor slabs, ceiling voids and services while keeping the facade's appearance consistent.

Solar control glass

Coated glass that limits solar heat gain on sunny elevations while keeping good daylight, reducing overheating and glare inside.

Unitised curtain wall

Factory-assembled, pre-glazed storey-height panels lifted into place, reducing site joints and work at height on taller or tight sites.

Capped system

Glass clamped by pressure plates behind a visible external cap, available in different profiles and colours to emphasise the grid.

Curtain Walling in Staffordshire: questions

How should curtain walling be maintained?

Curtain walling should be cleaned regularly and inspected at planned intervals. Check that drainage outlets are clear, gaskets have not shrunk or slipped, sealant joints are intact and fixings show no corrosion. Address misted or cracked units early. A simple maintenance schedule kept with the building records helps facilities teams spot problems before they become leaks.

Can a single broken glass unit in a curtain wall be replaced?

Usually, yes. In capped systems the cap and pressure plate are removed to release the glass, and a new unit is fitted and resealed. Structurally bonded glass needs the new unit bonding to its carrier, which takes more preparation. Height and access drive much of the work, so we survey the unit and access before quoting.

How long does a curtain walling project take?

Timescales depend on size and complexity. Design, approvals and fabrication of framing and glass usually take several weeks to a few months before installation starts. Installation then depends on the facade area, access and sequencing with other trades. Replacing individual units is much quicker once the glass is made. Your written quote sets out the expected programme.

Do glazed screens in offices and entrances need markings?

Large areas of clear glass that people could walk into need to be made visible. In England, the guidance for buildings other than dwellings puts manifestation at 850–1000mm and 1400–1600mm above the floor, and workplace rules across Great Britain require glass to be marked where needed for safety. Frosted bands or logos can meet this.

Which parts of Staffordshire do you cover for curtain walling?

We cover the whole of Staffordshire, including Stoke-on-Trent, Newcastle-under-Lyme, Burton upon Trent, Cannock and Tamworth, and postcode areas B, DE, DY, ST, WS, WV. Building rules for curtain walling here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Other glazing services in Staffordshire

All glazing in Staffordshire · Curtain Walling & Glazed Screens across the UK

Get a written quote in Staffordshire

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

Get a guide price 0800 088 6248 WhatsApp