Call 0800 088 6248

Burgess Hill · West Sussex

Curtain Walling in Burgess Hill

Is water getting in around an older glazed facade in Burgess Hill? We can inspect gaskets, seals and drainage paths and quote for the repairs or replacement needed.

  • RH15
  • Guide from £455 per m²

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

About aluminium curtain wall in Burgess Hill

The look of the facade depends on how the glass is held. Capped systems clamp the glass with pressure plates hidden behind a visible cover cap, while structural silicone glazing bonds the glass to carrier frames so the outside reads as a smooth, almost frameless surface.

Wind load on a facade rises with height, exposure and building shape, and it decides the mullion size, bracket design and glass thickness. Calculations for the specific site are part of the design, so a system suited to a sheltered ground-floor screen may not suit an exposed upper storey.

Where a glazed screen must resist fire, the glass only performs as part of a fire-resistant system tested with its frame, seals, beads and fixings. Ratings use letters such as E for integrity and EI for integrity and insulation, and components must not be swapped without test evidence.

A stick system is built on site piece by piece. Aluminium mullions and transoms are fixed to the structure first, then the glass and infill panels go in, and finally the pressure plates and caps. It suits low-rise buildings and screens but needs access to both faces.

What you get

  • Sealing, weathering and drainage details at all interfaces
  • Survey of openings, supporting structure and access
  • Supply and installation of framing, glass and panels
  • Final inspection, clean and maintenance guidance
Glass curtain wall on an office building against a blue sky

Local details for Burgess Hill

Postcodes covered
RH15 and the surrounding area, including Haywards Heath, Brighton & Hove and Crawley
Coast
Burgess Hill sits roughly 15 km from the nearest coastline, close enough that exposure on open or high ground is worth considering. Facades near the sea face salt-laden wind and driving rain, which attack frame finishes and stress seals. Suitable coating specifications, regular washing, gasket checks and higher design wind loads for exposed sites all matter for curtain walling there.
Daylight and sun
In Burgess Hill the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 62° and 16.3 hours in midsummer. Large glazed facades bring in plenty of daylight but also solar gain and glare, especially on south and west elevations. Solar control glass, shading and blinds are balanced against light transmission so interiors stay bright without overheating.
Access and setting
Commercial buildings on open rural or upland sites can face high wind exposure and driving rain, which affect frame sizes, glass thickness and sealing details. Longer delivery routes for large glass units also need planning in advance.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Burgess Hill

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Curtain walling, per m² (stick system)£455 – £795
Curtain walling, per m² (unitised)£545 – £955

Get a guide price for your size

Replacing windows and doors with similar ones is usually permitted development for houses in England. Flats, listed buildings and homes in conservation areas or covered by an Article 4 direction can need permission, so check with the council first.

Specification choices

Opaque spandrel panels

Insulated or back-painted glass panels that hide floor slabs, ceiling voids and services while keeping the facade's appearance consistent.

Stick curtain wall

Mullions and transoms assembled on site with glass and panels fitted afterwards, suited to low-rise buildings, entrances and ground-floor screens.

Solar control glass

Coated glass that limits solar heat gain on sunny elevations while keeping good daylight, reducing overheating and glare inside.

Curtain Walling in Burgess Hill: questions

What glass is used in curtain walling?

Curtain walling normally uses sealed double or triple glazed units, with toughened or laminated panes chosen for safety, security and wind load. Coatings control heat loss and solar gain, and heat-soaked toughened glass is often specified for upper levels. Where fire resistance is needed, a tested fire-resistant glazing system is used instead of standard glass.

How long does a curtain walling project take?

Timescales depend on size and complexity. Design, approvals and fabrication of framing and glass usually take several weeks to a few months before installation starts. Installation then depends on the facade area, access and sequencing with other trades. Replacing individual units is much quicker once the glass is made. Your written quote sets out the expected programme.

Do glazed screens in offices and entrances need markings?

Large areas of clear glass that people could walk into need to be made visible. In England, the guidance for buildings other than dwellings puts manifestation at 850–1000mm and 1400–1600mm above the floor, and workplace rules across Great Britain require glass to be marked where needed for safety. Frosted bands or logos can meet this.

Does new curtain walling need building regulations approval?

New curtain walling is building work that has to meet requirements for structure, energy and fire, so it is normally checked by building control as part of the project. The approval route depends on the building and the nation, because England, Wales, Scotland and Northern Ireland have separate systems. Planning permission may also be needed for changes to appearance.

Do you cover Burgess Hill for curtain walling?

Yes. We can quote for curtain walling across Burgess Hill and the surrounding West Sussex area, including postcode districts RH15, and nearby Haywards Heath, Brighton & Hove and Crawley. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Burgess Hill

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote