Call 0800 088 6248

Brighton & Hove · East Sussex

Curtain Walling in Brighton & Hove

Misted, cracked or leaking facade units in Brighton & Hove can usually be replaced individually, and we can survey the system and access before quoting.

  • BN1
  • BN3
  • BN2
  • Guide from £455 per m²

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

About commercial glazed screens in Brighton & Hove

Where a glazed screen must resist fire, the glass only performs as part of a fire-resistant system tested with its frame, seals, beads and fixings. Ratings use letters such as E for integrity and EI for integrity and insulation, and components must not be swapped without test evidence.

BS EN 13830 is the product standard for curtain walling. It treats the system as a kit, including its fixings, set from vertical up to 15 degrees off vertical. Sloping roof glazing and patent glazing fall outside it and are covered by other standards.

Building regulations require external walls to limit the spread of fire, so curtain walling design has to consider how its materials react to fire and how fire could pass between floors. The requirements depend on the building's height and use, and differ between the UK nations.

Under the energy rules for new work in England, curtain walling performance is assessed for the whole system, including frames and opaque infill panels, not just the glass. Solar gain through the glass is also considered, so the glass choice balances heat loss, overheating and daylight.

What a typical job includes

  • Supply and installation of framing, glass and panels
  • Survey of openings, supporting structure and access
  • System selection and glass specification for the building
  • Sealing, weathering and drainage details at all interfaces
Glass curtain wall on an office building against a blue sky

Working in Brighton & Hove

Postcodes covered
BN1, BN3, BN2 and the surrounding area, including Burgess Hill, Worthing and Seaford
Coast
Brighton & Hove is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Facades near the sea face salt-laden wind and driving rain, which attack frame finishes and stress seals. Suitable coating specifications, regular washing, gasket checks and higher design wind loads for exposed sites all matter for curtain walling there.
Daylight and sun
In Brighton & Hove the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 63° and 16.3 hours in midsummer. Large glazed facades bring in plenty of daylight but also solar gain and glare, especially on south and west elevations. Solar control glass, shading and blinds are balanced against light transmission so interiors stay bright without overheating.
Access and setting
City-centre facades often need crane or hoist bookings, pavement or road licences, out-of-hours deliveries and close coordination with other trades. Tight sites need careful sequencing, and unitised panels can reduce the amount of work at height.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Brighton & Hove

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Curtain walling, per m² (stick system)£455 – £795
Curtain walling, per m² (unitised)£545 – £955

Get a guide price for your size

If the glass sits in a fire-resisting door or screen, such as a flat entrance door or a commercial corridor screen, it must be replaced with fire-rated glazing tested as part of that system. Ordinary toughened glass is not a substitute.

What you can choose

Integrated opening vents

Top-hung or parallel-opening vents built into the curtain wall grid to provide natural ventilation without breaking the facade line.

Stick curtain wall

Mullions and transoms assembled on site with glass and panels fitted afterwards, suited to low-rise buildings, entrances and ground-floor screens.

Solar control glass

Coated glass that limits solar heat gain on sunny elevations while keeping good daylight, reducing overheating and glare inside.

Curtain Walling in Brighton & Hove: questions

Can a single broken glass unit in a curtain wall be replaced?

Usually, yes. In capped systems the cap and pressure plate are removed to release the glass, and a new unit is fitted and resealed. Structurally bonded glass needs the new unit bonding to its carrier, which takes more preparation. Height and access drive much of the work, so we survey the unit and access before quoting.

What glass is used in curtain walling?

Curtain walling normally uses sealed double or triple glazed units, with toughened or laminated panes chosen for safety, security and wind load. Coatings control heat loss and solar gain, and heat-soaked toughened glass is often specified for upper levels. Where fire resistance is needed, a tested fire-resistant glazing system is used instead of standard glass.

What affects the cost of curtain walling?

The main cost drivers are facade area, system type, glass specification, infill panels, opening vents, building height and access equipment such as scaffolding, hoists or cranes. Structural silicone glazing, unitised panels, fire-resisting sections and testing requirements add cost. See the guide prices for typical ranges, and your written quote fixes the price for the specification.

Should I choose a stick or unitised curtain wall?

A stick system is assembled on site and generally suits low-rise buildings, entrances and smaller screens, with simpler logistics. A unitised system uses factory-made panels lifted into place, which reduces site joints and work at height but needs cranage and longer planning. The building's height, access and programme usually decide which is the right fit.

Do you cover Brighton & Hove for curtain walling?

Yes. We can quote for curtain walling across Brighton & Hove and the surrounding East Sussex area, including postcode districts BN1, BN3 and BN2, and nearby Burgess Hill, Worthing and Seaford. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Brighton & Hove

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote