Reading · Berkshire
Frameless Glass in Reading
Our glaziers fit frameless glass doors and fixed screens in Reading for homes, offices and shops, matching the hardware finish to the room or shopfront.
- RG1
- RG4
- RG30
- Guide from £795
Glass entrance doors across Reading
For buildings other than dwellings in England, access guidance says a manual door should open with no more than 30N of force at its edge from closed to 30 degrees, and 22.5N from 30 to 60 degrees. Heavy glass doors and closers are set up with that limit in mind.
Frameless doors run with small gaps at the edges and under the door, so they do not seal against sound or draughts the way a framed, gasketed door does. Clear seal strips can reduce the gaps, but where privacy or noise matters, an acoustic framed system may suit better.
The guidance in England asks for glass meeting Class 3 of BS EN 12600 in most critical locations, and the higher Class 2 where a door or door side panel is more than 900mm wide. Toughened glass for doors is made to suit, and Wales, Scotland and Northern Ireland have their own guidance.
In workplaces in England, Wales and Scotland, the Workplace (Health, Safety and Welfare) Regulations 1992 require glass in doors, walls and partitions to be of safety material or protected where needed for safety, and to be marked or otherwise made apparent so people notice it.
What you get
- Holes and cut-outs made at the factory before toughening
- Fitting, alignment and adjustment of closing speed
- Hinges, patch fittings, floor spring or sliding gear
- Survey of the opening, floor and fixing points
Working in Reading
- Postcodes covered
- RG1, RG4, RG30 and the surrounding area, including Earley, Henley-on-Thames and Wokingham
- Coast
- Reading is well inland, around 67 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Reading the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
- Access and setting
- Large glass panels for city shops, offices and flats can need a planned delivery, a team to carry them, and sometimes a lift or crane booking. Access through communal areas, loading limits and permitted working hours all affect the fitting day.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Reading
| Typical job | Guide price inc VAT |
|---|---|
| Frameless glass door with fittings | £1,295 – £1,895 |
| Door with fixed side screen | £2,195 – £3,195 |
| Fixed frameless screen, about 2 m² | £795 – £1,095 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
Options to choose between
Low-iron glass
Glass with less iron, removing the green tint seen on the edges of standard glass, so thick panels look clearer and colours stay true.
Pivot door with patches
Corner patch fittings with a floor spring or pivot, the usual choice for shop and office entrances and wide internal doors that need controlled closing.
Satin or patterned glass
Acid-etched, sandblasted-effect or patterned glass that gives privacy while still passing light, available as full panels or as bands.
Frameless Glass in Reading: questions
What affects the cost of frameless glass doors and screens?
The main cost drivers are panel size and thickness, the number of panels, the hardware type, and whether a floor spring needs a recess cutting into an existing floor. Satin or low-iron glass, special hardware finishes and difficult access also add cost. See the guide prices for typical ranges, and the written quote fixes the price for your specification.
How long does it take to get a frameless glass door fitted?
Once the opening is templated, the glass is made to order and toughened, which usually takes a few weeks. Fitting a single door or screen is normally done in a day, while larger entrances or runs of screens take longer. Your written quote sets out the expected programme, and we confirm the date when the glass is ready.
How do I look after a frameless glass door?
Clean the glass with a soft cloth and a non-abrasive glass cleaner, and wipe metal fittings with a damp cloth rather than harsh chemicals. Do not hang anything from the door or let it slam against a stop. If the door starts closing too hard or drops out of line, the floor spring or pivots can be adjusted before wear sets in.
What thickness of glass is used for frameless glass doors?
Frameless doors usually use 10mm or 12mm toughened safety glass. The thicker glass is generally used for taller or wider doors and for busy commercial entrances, while 10mm often suits internal doors in homes. The hardware maker's limits for panel weight and size also guide the choice, and we confirm the thickness in your written quote.
Do you cover Reading for frameless glass?
Yes. We can quote for frameless glass across Reading and the surrounding Berkshire area, including postcode districts RG1, RG4 and RG30, and nearby Earley, Henley-on-Thames and Wokingham. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Reading
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.