Call 0800 088 6248

Berkshire · England

Frameless Glass in Berkshire

Frameless glass in Berkshire starts with templating the opening, so the toughened panels are made with every hole and cut-out formed before the glass is toughened.

  • Guide from £795
  • 11 towns covered
  • Postcode areas GU, RG, SL

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Glass entrance doors in Berkshire: what to know

In workplaces in England, Wales and Scotland, the Workplace (Health, Safety and Welfare) Regulations 1992 require glass in doors, walls and partitions to be of safety material or protected where needed for safety, and to be marked or otherwise made apparent so people notice it.

A floor spring sits in a steel box set into the floor below the door, controlling closing speed and hold-open. It needs a recess cut into the screed, so it is far simpler to plan before tiles, stone or timber flooring are laid than to retrofit later.

Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory before delivery, though it cannot remove the risk entirely. It is often specified for large doors and screens in busy buildings.

Toughened glass cannot be cut, drilled or notched once it has been toughened. Holes for patch fittings, cut-outs for locks and handles, and any shaped corners are all made before toughening, which is why we template the opening first and the glass is made to order rather than cut on site.

Frameless glass doors and screens at an office reception

Towns we cover for frameless glass in Berkshire

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Berkshire

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).

Berkshire is inland, around 56 km from the nearest coast at its closest point, so salt exposure is rarely a factor.

Large glass panels for city shops, offices and flats can need a planned delivery, a team to carry them, and sometimes a lift or crane booking. Access through communal areas, loading limits and permitted working hours all affect the fitting day.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Frameless glass door with fittings£1,295 – £1,895
Door with fixed side screen£2,195 – £3,195
Fixed frameless screen, about 2 m²£795 – £1,095

Choosing your frameless glass

Satin or patterned glass

Acid-etched, sandblasted-effect or patterned glass that gives privacy while still passing light, available as full panels or as bands.

Fixed glass screen

A non-opening panel held in slim channels or clamps, used to divide rooms, line stairs or form a side panel beside a glass door.

Hardware finishes

Patch fittings, handles and hinges in satin or polished stainless steel, black or other finishes to match the room or shopfront.

Pivot door with patches

Corner patch fittings with a floor spring or pivot, the usual choice for shop and office entrances and wide internal doors that need controlled closing.

Frameless Glass in Berkshire: questions

Do frameless glass doors have to be safety glass?

Yes. Glass in doors is a critical location, so in England it must meet the impact requirements in Approved Document K, and frameless doors are made from toughened safety glass to suit. Toughened glass also lets the door carry its own hinges and handles. Other UK nations have equivalent guidance, and we specify the glass to suit where you are.

How long does it take to get a frameless glass door fitted?

Once the opening is templated, the glass is made to order and toughened, which usually takes a few weeks. Fitting a single door or screen is normally done in a day, while larger entrances or runs of screens take longer. Your written quote sets out the expected programme, and we confirm the date when the glass is ready.

Can a frameless glass door be locked?

Yes. A patch lock at the bottom of the door shoots a bolt into a keep in the floor, and a centre lock can join a pair of doors. A glass door does not offer the same resistance as a solid door, so for external entrances you may also want shutters, an alarm or laminated security glass in adjoining screens.

Can a frameless glass door be fitted into my existing doorway?

Usually, yes. We survey the opening to check the head and walls can take the fixings, and template it so the glass follows any out-of-square edges. A floor spring needs a recess in the floor, so where that is not practical we may suggest a top pivot, wall hinges or sliding gear instead. Some making good of plaster may be needed.

Which parts of Berkshire do you cover for frameless glass?

We cover the whole of Berkshire, including Reading, Slough, Bracknell, Maidenhead and Wokingham, and postcode areas GU, RG, SL. Building rules for frameless glass here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Berkshire

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote